Quadro Comill "type" stainless steel 17" diameter conical mill
- On stainless steel base on casters

Quadro model 193 stainless steel Comil
- Serial #0057

Quadro model 194 Comil
- Stainless steel
- Capacity: up to 5,000 lbs/hr
- Serial #194-1448

Quadro model 196S Comil
- Stainless steel
- 15 HP motor
- Capacity: up to 15,000 lbs/hr
- Serial #196-0847

Quadro model 197-T comil
Quadro model Comill 197-TT stainless steel mill
-Stainless steel hopper
- Stainless steel screen & rotor
-1 HP, 1 phase, 60 cycles, 115-230 volts motor
- Serial#197-0141

Quadro model 197S Comil
- Stainless steel
- 1 HP motor
- Capacity: up to 1,000 lbs/hr
- Serial # 197-0939

Quality Cup model QC-8 Rotary Cup Filler & Sealer
- Cup dispenser, piston filler, pre-cut lid placer and heat sealer
- Current cup size is 51 mm diameter x 31.75 mm tall (WinZip cup model CPM10011)
- Currently filling 1 ounce of vanilla flavoring into the cup (piston is 5 ounces)
- 5 gallon stainless steel hopper
- Machine size range: Max. diameter 3.125" x 3.5" tall (change parts required)
- Output: up to 45 cups/minute
- Serial#QC08-0922 built 2009

RMB Stainless Steel Z-Configuration Bucket Elevator
- Model LS100-91-SST, built 2014
- 120" long vertical section
- 52" infeed section
- 144" outfeed
- 72" long downward section at discharge
- Chain and buckets in box
- Bucket size: 12" x 4" x 3" deep
- 3 phase, 230/460 volt motor

RMB Stainless Steel Z-Configuration Bucket Elevator
- Model LS100-91-SST, built 2014
- 120" long vertical section
- 52" infeed section
- 144" outfeed
- 72" long downward section at discharge
- Chain and buckets in box
- Bucket size: 12" x 4" x 3" deep
- 3 phase, 230/460 volt motor

RMB Stainless Steel Z-Configuration Bucket Elevator
- Model LS100-91-SST, built 2014
- 120" long vertical section
- 52" infeed section
- 144" outfeed
- 72" long downward section at discharge
- Chain and buckets in box
- Bucket size: 12" x 4" x 3" deep
- 3 phase, 230/460 volt motor

RMB Stainless Steel Z-Configuration Bucket Elevator
- Model LS100-91-SST, built 2014
- 120" long vertical section
- 52" infeed section
- 144" outfeed
- 72" long downward section at discharge
- Chain and buckets in box
- Bucket size: 12" x 4" x 3" deep
- 3 phase, 230/460 volt motor

RMB Stainless Steel Z-Configuration Bucket Elevator
- Model LS100-91-SST, serial#14-J107U1 built 2014
- 120" long vertical section
- 52" infeed section
- 144" outfeed
- 72" long downward section at discharge
- Chain and buckets in box
- Bucket size: 12" x 4" x 3" deep
- 3 phase, 230/460 volt motor

RMB Stainless Steel Z-Configuration Bucket Elevator
- Model LS100-12T-SSC, serial#14-J107U3 built 2014
- 92" discharge height
- 106" infeed section
- 112" outfeed
- Chain and buckets in box
- Bucket size: 12" x 4" x 3" deep
- 3 phase, 230/460 volt motor

ROLLER COMPACTOR
ROLL COMPACTOR, WITH A MATEER HEAD TYPE POWDER FEEDER, 6" DIAMETER STAINLESS STEEL ROLLS, MACHINE DIMENSIONS 50" LONG X 40" WIDTH X 90" HEIGHT

ROURE VOLUMETRIC POUCH FORMER & FILLER -
ROURE AUTOMATIC POUCH FORMER COMPLETE WITH A (7) CUP VOLUMETRIC FILLER WITH STAINLESS STEEL HOPPER AND AGITATOR, 5-1/4" LONG VERTICAL SEAL BAR AND 4-1/8" WIDE HORIZONTAL SEAL BAR WITH A SCISSOR PAPER KNIFE, TEMPERATURE CONTROLS, NO ELECTRIC EYE AND WITH A

Racine 16" Candy Depositor
- 7 outlet rotary valve
- Stainless Steel jacketed and agitated hopper
- Raising and lowering device for conveyor
- Hot water system
- Chain conveyor
- 220 volts

Racine 32" Wide Chocolate Chip Line with Cooling Tunnel
- 32" wide depositor
- (5) Nozzle bars included (nozzle opening sizes: 1, 4, 4.5, 6.5, 6.5, and Mixed 4.5/6.5
- 61ft 9" long steel belt cooling tunnel with chilled water cooling system

Rapid Pack model RPMACH1+ automatic blister packager
- Set for (2) 1 3/4" width x 4" long blisters
- Film preheating station
- Film forming station
- Area for automatic product filling
- Film sealing station
- Film cut station
- 2 HP, 3 Phase, 60 cycles, 220-380 volt motor
- Serial no. M17046

Rasch RUD Foil Wrapper
- Built new in 1970
- Serial number 50519
- Set for round piece
- Electric eye
- Lady bug foot feeder
- Belt infeed
- Open feed plate
- Belt discharge

Rasch model RK Foil Bunch wrapper
- Belt to plate infeed
- Set to bunch with foil (plain or continuous print)
- Set for approx. 1.5" diameter chocolate coins
- Serial#60067