(2) Alliance HPLC with 2695 Separations Module and 2996 Photodiode Array Detector with one Computer PC with software for both units
- HPLC 1
- 186001791 Serial#M04SMC857M (small removable side unit)
- 289000560 Model Code SHC, serial#M04SHC270M (main unit)
- Waters Corporation 186001791 serial#D08SMC227E
- HPLC 2
- WAT270008 serial#J04SM4665M
- 289000560 Model Code SHC, serial#F18SHC153A (main unit)
- 800000102 serial#M01487155R

TLC Dynamic 400 Horizontal Flow Wrapper with Auto Feed (unused)
- Serial#1977CFGM040RHV00 built 2022
- 3 phase, 60 cycle, 230 volts
- 17.5" wide right angle belt feeder to auto belt infeed on flow wrapper
- 1 UP 170 mm (6.7") wide sealing jaw
- 4ft long lug infeed conveyor. Removable lugs for 3", 6" and 9" centers
- Auto right angle belt product feeder
- Chilled plates with water chiller
- Max Film Width: 400mm
- Film Plain or with Eye-Spot
- Film Type: OPP, Laminate, Coextruded (Max 50 Micron)
- Max Roll Diam.: 350mm Core Diam.: 76mm
- Max Speed: 120 (Depending on product and size)

TLM model Prime 600 Vertical Pouch Machine Hand fed
- Serial#1985 built 2022
- 1 phase, 60 cycle, 220 volts, 3 kw, 3 BAR compressed air
- Speed: 20 ppm Max (depending on product and size)
- Max bag width = 200 mm
- Bag length: 50 to 900 mm
- Film width max: 600mm
- Max Film Roll Diameter: 300mm
- Film Core Diameter: 76mm
- Film: Plain or with Eye-Spot

TLM model Prime 600 Vertical Pouch Machine Hand fed
- Serial#1943 built 2022
- 1 phase, 60 cycle, 220 volts, 3 kw, 3 BAR compressed air
- Speed: 20 ppm Max (depending on product and size)
- Max bag width = 200 mm
- Bag length: 50 to 900 mm
- Film width max: 600mm
- Max Film Roll Diameter: 300mm
- Film Core Diameter: 76mm
- Film: Plain or with Eye-Spot

TLM model Prime 600 Vertical Pouch Machine Hand fed
- Serial#1869 built 2022
- 1 phase, 60 cycle, 220 volts, 3 kw, 3 BAR compressed air
- Speed: 20 ppm Max (depending on product and size)
- Max bag width = 200 mm
- Film width max: 600mm
- Bag length: 50 to 900 mm
- Max Film Roll Diameter: 300mm
- Film Core Diameter: 76mm
- Film: Plain or with Eye-Spot

TLM model Prime 600 Vertical Pouch Machine Hand fed
- Serial#1631 built 2020
- 1 phase, 60 cycle, 220 volts, 3 kw, 3 BAR compressed air
- Speed: 20 ppm Max (depending on product and size)
- Film width max: 600mm
- Max bag width = 200 mm
- Bag length: 50 to 900 mm
- Max Film Roll Diameter: 300mm
- Film Core Diameter: 76mm
- Film: Plain or with Eye-Spot

TOP & BOTTOM CARTON SEALER & TAPER
CARTON SEALERS AND TAPER, TOP AND BOTTOM, PRESSURE SENSITIVE, MANUAL ADJUSTMENT FOR DIFFERENT BOX SIZES, 1/3 HP, 110 V, 1 PH, 1750 R.P.M.

TRIVAC MODEL D30A PUMP
TRIVAC MODEL D30A VACUUM PUMP WITH 1.5-HP, 3 PHASE, 60 CYCLE, 230/460 VOLT MOTOR. CATALOG#898043.
VACUUM PUMP APPEARS TO BE NEW AND IN ORIGINAL BOX.

TYCON 300-GAL GLASS LINED TANK -
TYCO 300 GALLON GLASS LINED JACKETED TANK WITH LIGHTIN MIXER MODEL EV5L75 WITH 33" LONG SHAFT WITH 10" DIAMETER SHAFT, ATMOSPHERIC JACKET RATED UP TO 400 DEGREES F, MIXER DRIVEN BY A 3/4-HP, 3 PHASE, 60 CYCLE, 230/460 VOLT MOTOR WITH 230 VOLT A/C SPEED CO

Tablet deduster

Talsa K30 NEO SS 30-liter Bowl Chopper
- 30 liters (apprx 8 gallon) bowl capacity
- Meat capacity 11-48 lbs
- Variable speed control with 4 programmable speed settings
- 7" digital touch screen display knife speed, temperature and time
- Built 2020, serial#20-7274
- 3 phase, 60 cycle, 208 volts, 7.5 HP

Tank Stainless Steel 117 gallon with Lightnin' mixer
- 31" diameter x 36" deep
- flat bottom
- bottom side discharge with valve

Tecnicoll Model T20 Powder Press
- 3 phase, 60 cycles, 208 volts
- Serial #8498144

Tecnipac automatic capper
- with bowl feeder
- 30 mm diameter cap chute
- Star wheel with 8 station
- 3 ½ wide x 77” flat top conveyor
- 2 HP, 3 Phase, 60 Hz, 220 volt motor

Tecnipac stainless steel plastic flat top chain conveyor
- 3" width x 95" long conveyor
- Variable speed
- 1/3 HP, 1 Phase, 60 cycles,110 volts motor

Telstar model AH-100 stainless steel laminar flow hood.
-24" deep x 45 1/2" long x 29 1/2" high.
-With filter.
-Control panel.
-1 Phase, 230 Volts.

The Label Dispenser LD5100, Label Dispenser
- S/N 511253,
- 100/120V,
- 50/60 Hz. (26x28x38)

Therminox model TX 45/45 stainless steel positive displacement pump
-Jacketed
-1 1/2" inlet and outlet
-Gear pump
-3 HP, 3 Phase, 60 Hz, 220 volt motor

Therminox model TX 70/70 stainless steel positive displacement pump
-Jacketed
-2" inlet and outlet
-Gear pump
-5 HP, 3 Phase, 60 Hz, 220 volt motor

Therminox model TX 70/70 stainless steel positive displacement pump
-Jacketed
-2" inlet and outlet
-Gear pump
-5 HP, 3 Phase, 60 Hz, 220 volt motor
-Serial no. 50003183-15-3