Toyota model 7FGCU15 3000 lb Propane Riding Forklift
- LPG gas
- Serial#60767
- Good working order

-Stainless steel hopper
-1 ½” inlet, 2” outlet
-Butterfly valve
-Mounted on base
-20HP, 3 Phase, 60 cycles, 380-660 volt motor

Triumph 15" Wire Cut Extruder
- Conveyor with belts for trays
- Mounted on casters

Truffly Made XL Universal Depositor
- For gummies, caramel & candy
- Used in edibles/cannabis plant
- Built new in 2018
- Stainless steel table top
- 3.2 gallon heated hopper
- (8) nozzles for 11.5 wide molds
- Missing (2) pistons
- Digital temp controls up to 320F
- Adjustable 40mm nozzles
- Dosing 3grams to 16.5 grams
- https://www.trufflymade.com/product/truffly-made-universal-xl-depositor-for-candy-gummies-chocolate-edibles/

Truffly Made XL Universal Gummy Depositor with Molds and Panner
- Truffly XL Universal Depositor
- Type BB Regelung, input 100-240VAC 50/60 HZ, Output 24VCD max 600W (200W per connection)
- Built 2022
- (8) Pistons
- 12-liter Stainless Steel Hopper
- (25) Vector Silicone Molds for above depositor
- 22 x 8 cavities set for 2.8 gram cube measuring 9/16" x 9/16" x 9/16"

- Chocovision 16" Stainless Steel Panner with Baffles
- 20 lb capacity
- model C116110VPANNERUS
- 10.5" deepp with 10" diameter opening
- 110 volts variable speed and clockwise/counter clockwise switch

Tubular bench in stainless steel
- 43x28x26"

Turbofil Bench Top Vacuum Filler -
- 1/8" diamter nozzle
- Gast model 440V12C Vacuum pump with 1/2-HP, single phase, 60 cycle, 115/230 volt motor

Twin Propeller Agitator
Stainless steel
20” shaft
(2) 4” diameter propellers
Adjustable leveling feet
1/2 HP, 3 phase, 50/60 cycles, 208-230 / 380-460 volts

UNIPAC COMBIMATIC 12-STATI.PLAST.TUBE FILLER -
UNIPAC COMBIMATIC 12-STATION PLASTIC TUBE FILLER AND SEALER WITH TUBE LOADER, ELECTRIC EYE SPINNER, RADIANT HEAT SEALER WITH BLOWER, S/S PRODUCT HOPPER DRIVEN BY A 1-HP, 3 PHASE, 60 CYCLE, 220 VOLT MOTOR.
WE RECEIVED TWO SETS OF TUBE HOLDERS FOR 1" AND

Uhlmann model C100 Cartoner with blister feed -
- Automatic reverse tuck cartoner
- Intermittent motion
- Bottle feeder
- 5" adjustable centers on carton chain
- Piab Vacuum system
- It is currently adjusted for a carton of:
7 cm long, 5.5 cm wide, 11.5 cm high..
- 3 phase, 60 cycle, 460 volts

Uhlmann model C100 horizontal cartoner.
-Automatic.
-Whit carton magazine.
-For blister.
-Manual adjustment for differenrt carton size.
-Control panel.
-1 HP, 3 Phases, 60 Cycles, 220 volts motor.

Uhlmann model HS30 powder pouch FF&S
- Auger filler with stainless steel hopper and internal agitator
- 4” long vertical seal bar and 3” wide horizontal seal bar
- Individual cut with scissor
- Temperature controls
- Electric eye
- 1/3 HP, 3 Phase, 60 Hertz, 220 volt motor

Uhlmann model UPS-1.1 automatic blister packager
-Set for (5) 1 1/2" width x 4" long blisters
-Film preheating station
-Film forming station
-Automatic product feed system
-Film sealing station
-Film cut station
-2 HP, 3 Phase, 60cycles, 220-380 volt motor
-Serial no. 78/116

- Set for (4) 1 1/2" width x 4" long blisters
- Film preheating station
- Film forming station
- Area for manual product filling
- Film sealing station
- Film cut station
- 3 HP, 3 Phase, 60cycles, 220-380 volt motor
-Serial no. 210

Ultra Turrey carbón steel Portable Mixer
-1" carbón steel shaft
-Missing propeller
-8 HP, 3 Phase, 60 cycles 380-440 Volts motor

Unified Flex Hornet Vertical Form, Fill & Seal with Auger Filler
- Serial#20210009
- Single phase, 220 volts
- Auger filler (Vacuum loader not included)
- Electric eye for printed film
- Valve bowl feeder with welder
- Bag sizes: Width up to 13" and Length up to 20"
- 80 bags/minute maximum speed
- Packaging 2, 6.5 oz pouches of coffee and 12 oz to 1lb and 5 lb bags with welded valve
- Touchscreen HMI
- Printer not included
- Capable producing pillow bags with Eurohole, side gussets and block bottom bags

Unifill Model TR-86 Single Dose Thermoformer, Filler and Sealer
- Stainless steel
- 6 Endress & Hauser flowmeters
- Stainless Steel jacketed tank
- Full enclosure HEPA filter and positive air ready
- Change parts for 1, 1.5 & 2ml monodose snap tip units
- Maximum film width: 345mm
- Pitch: 90-120mm
- Package thickness (one side): 5-12.5mm
- Package thickness (two sides): 10-25mm
- Up to 21 cycles/minute
- Dimensions: 3895 (L) x 1975 (W) x 2110mm (H)
- For cosmetic & pharmaceutical use
- Manufactured in 2003
- Serial #20501/112

AccuChiller model EQ3A01 Thermal Care portable chiller
- Single phase, 60 cycles, 230 volts
- Serial #16663011004

VideoJet model 3640-IP54 Laser coder
- Advantage Oracle Fume Extractor
- Smart Graph Marking Software
- Serial # 19168011LWD

92,156 ft (6 pallets) of PVC/PVDC/PE (120/40/40 micron) white rolls of thermoform material 343mm web, 360mm OD, 76mm (3") core (purchased for $33,751)

Line is in good running condition, and can be cycled for your inspection

Unifiller Model SCM B1 Mini Depositor
- Built new in 2013
- Serial number 015
- Stainless steel
- 60 to 80 deposits per minute
- Up to 3600 deposits per hour
- Weight range 7g to 510g
- Feed auger
- For cookie doughs and batters
- Comes with (3) drums
- 1/60/230v

Unique Model UMIB-150 Tablet/Capsule Inspection Machine
- Detects microscopic metallic contaminants (ferrous, non-ferrous, and stainless steel) while visually scanning for deformations, cracks, or discoloration.
- Stainless steel
- Metal detector
- Vibratory hopper
- Integrated dust extraction system
- Foot pedal
- 5-3/4" wide belt
- Up to 150,000 capsules/hour
- Dimensions: 80" (L) x 20" (W)
- Serial #14114010