ABC Hansen Model MPL 110-S Grain Mill
- Serial number 3869
- 12" diameter mill
- Motor 10-HP 3/60/208-230/460 volt

Colomar colloidal vertical colloid mill
-Stainless steel rotor 2" diameter
-Missing adjusting and hopper
-3 HP, 3 phases, 60 cycles, 220-440 volts motor.

Fryma model MK 60 vertical stainless steel colloid mill
- Applications include dispersion wet milling for food, cosmetics, chemicals, etc.
- Adjustable grinding gap
- 1 HP motor
- Serial #78-5229

Fryma model MK160/R carborundum stone mill
- Built new in 1983
- Serial number 786734
- Jacketed head
- Portable cart
- Motor 11 kw (15 HP) 3/60/440v

Fryma model MZ80R vertical stainless steel colloid mill
- Toothed mill design for wet milling of fluids & viscous emulsions & suspensions
- Estimated capacity: 100-1000 liters per hour
- Particle size range: 500-100 microns
- Adjustable grinding gap
- 5 HP motor

GREERCO NO MODEL VERTICAL COLLOID MILL, STAINLESS STEEL ROTOR 4" DIAMETER, 7.5 HP, 220-440 V, 3Ph, 2350 R.P.PM., MACHINE DIMENSIONS 16" DIAMETER X 28" HEIGHT

Koruma model J2 carborundum vertical colloid mill
- Stainless steel hopper
- 6" diameter stones
- 5 HP, 3 Phase, 60 cycles, 220-380 volt motor.
- Serial no. 1645

Mabatec belt conveyor
- 0.18kw motor

Micron model 1SH stainless steel Mikro Pulverizer
- Steel base on casters
- Main motor: 3HP, 3 phase, 60 cycles, 230/460 volts
- Screw feed motor: 1/4HP, 3 phase, 60 cycles, 230/460 volts
- Serial #M221002J1

Mikro model Bantam pulverizer
- Stainless steel contact parts
- Screw feed
- Stirrup rotor
- Controls

PREMIER JACKETED COLLOID MILL
, WITH STAINLESS STEEL IMPELLER AND HOPPER, 6" DIAMETER, GRINDING ADJUSTMENTS, 10 HP, 220-440 V, 3 Ph, 1750 R.P.M., COLLOID MILL DIMENSIONS, 25" LONG X 20" WIDTH X 70" HEIGHT

3M MATIC MODEL 28600 CASE TAPER, PRESURE SENSITIVE ,TOP AND BOTTOM (MISING BOTTOM HEAD) ADJUSTMENT FOR DIFERENT SIZE OF BOXES , 1/6 HP, 115 V. 1Ph, 1725 R.P.M.CASE TAPER DIMENSIONS 60 " LONG X 72" WIDTH X 44 " HEIGHT.

Quadro model 193 stainless steel Comil
- Serial #0057

Quadro model 194 Comil
- Stainless steel
- Capacity: up to 5,000 lbs/hr
- Serial #194-1448

Quadro model 197-T comil
Quadro model Comill 197-TT stainless steel mill
-Stainless steel hopper
- Stainless steel screen & rotor
-1 HP, 1 phase, 60 cycles, 115-230 volts motor
- Serial#197-0141

Quadro model 197S Comil
- Stainless steel
- 1 HP motor
- Capacity: up to 1,000 lbs/hr
- Serial # 197-0939

Quality Cup model QC-8 Rotary Cup Filler & Sealer
- Cup dispenser, piston filler, pre-cut lid placer and heat sealer
- Current cup size is 51 mm diameter x 31.75 mm tall (WinZip cup model CPM10011)
- Currently filling 1 ounce of vanilla flavoring into the cup (piston is 5 ounces)
- 5 gallon stainless steel hopper
- Machine size range: Max. diameter 3.125" x 3.5" tall (change parts required)
- Output: up to 45 cups/minute
- Serial#QC08-0922 built 2009

Ross 3-Roll Refiner
- Rolls 8" wide x 4" diameter
- Jacketed rolls
- Feed guides
- Discharge scraper
- Mechanical roll adjustments
- Motor 1HP 3phase 230v
- Casters & Electrical Plug
- Grinding chocolate 15 microns

Stainless steel vertical Autoclave
- 20" deep x 14" diameter chamber size
- Missing container
- Mounted on legs.
- 1 Phase, 110 volt

Steriline model EDM1 automatic vial washer and sterilizing heat tunnel
- Stainless steel
- Air blower
- Infeed conveyor
- 2 HP, 3 Phase, 60 cycles, 220 volt motor
Stainless steel sterilizing heat tunnel
- 12" wide x 67" long conveyor
- Electric heaters
- Blower
- 3/4 HP, 3 Phase, 60 cycles, 220 volt moto