Silverson 25 HP Stainless Steel High Shear Homogenizing Mixer
- “Drop-In” explosion proof motor
- 25 HP 3/60/230-460 volt 3,510 RPM Explosion Proof motor-
- Approximately 32" long stainless steel shaft
- Last used in personal care products business

Silverson model 3X High Shear Mixer on stand
- Serial#2CM2075
- 1 HP, 3 phase, 50 cycle, 240/415 volts, 2850 rpm
- Speed controller
- Silverson model D portable stand

Sine/Sundyne Corp MR130 SS PD Pump
- Model MR130, serial#99711541
- 3 HP, 3 phase, 60 cycle, 230/460 volt motor, 101 final RPM

Sine/Sundyne Corp MR130 SS PD Pump
- Model MR130, serial#99711540
- 3 HP, 3 phase, 60 cycle, 230/460 volt motor, 101 final RPM

Smith 26" wide x 12-ft long Stainless Steel Cooling Tunnel
- (1) Fan/coil unit (freon compressor not included - stayed with building)
- 17.5" long infeed section and 12" discharge section
- No control panel (panel was built into another Smith tunnel sold separately)
- Belt tracker

Sollich 42" Inclusion Feeder
- Stainless Steel Hopper
- 42.5" wide belt width (35.5" between the nylon guides)
- ½ HP, 3 phase, 60 cycle, 480 volt motor

Sollich 620 (24") Caramel Nut Cluster Depositing Line - 150 clusters/minute
- Sollich KGM-M 620 mm (10) Piston Chocolate Depositor
Serial#9041001 built 2007
(10) 1/2" diameter pistons on 2" centers
Stainless steel jacketed hopper 27" x 7" x 8" deep
3 phase, 60 cycle, 460 volts, 5 kva
- Sollich ND-600 Nut Dropper
(2) drums with 1.25" diameter clusters and (1) drum with 1" diameter clusters
Vibra vibratory Nut Feeder with 16" diameter x 17" deep hopper with 4" wide x 66" long channel vibrator feeder
- Egan 10-Piston Servo Caramel Depositor
Serial#11-1007 built 2011
(10) 9/16" diameter pistons
3 phase, 60 cycle, 460 volts
- Smith Stainless Steel 26" wide x 28-ft long (covered sections) Cooling Tunnel
(2) Fan/coil units with freon compressors (stayed with building)
HMI control Unit
Jacketed hopper 25" x 8" x 9" deep
- 55.5 ft long overall conveyor belt length (Chocolate depositor to end of Smith Cooling tunnel)
One continuous belt with belt tracker
This line deposited chocolate onto the belt as a base for the cluster, then deposits nuts and then liquid caramel. Patties are cooled in the cooling tunnel and then traveled through a Sollich enrobing line (which is available for sale with this line)
(2) Quartz heaters

Sollich Auger/Mixing Screw
- 12" diameter x 44" long auger
- Stainless Steel jacketed trough
- 2 HP, 3 phase, 60 cycle, 277/460 volt motor

Sollich Double Layer Slab Line with Sollich Enrober
- Spec Engineering Cooling Drum 40" diameter x 16" wide, mounted on top of Sollich WEB-400 double drum former. Drum is stainless steel with non-stick coating, internal water spray system, water pump, water to water heat exchanger, 3-way caramel in-take valve, 1 HP drum drive with VFD
- Sollich WEB-400 Double Drum Conbar Slab Former, serial#0264 built 1993 with glycol chiller
- Sollich WET-400 single drum former for second layer (caramel, nougat, fudge)
- Small gauging roller
- Sollich cooling tunnel before slitting and cutting is not included
- Bepex Hutt type SG1200 Slitter and Spreader set for 3/8" wide strips, serial#50025 built 1993
- Bepex Hutt type SZ1200 Guillotine Cutter serial#50026 built 1993
- Sollich TS-820 820 mm Enrober with built-in tempering serial#0844 built 1969 (Enrober cooling tunnel is not included in the sale)
- This line creates a 16" wide slab that spreads out to approximately 22" wide

Sono Mechanics BSP-1200 Ultrasonic Liquid Processor
- Flow through attachment
- Producing nano emulsions
- Full wave Barbell horn
- Batch processor attachment
- Filter
- See link to OEM website: https://www.sonomechanics.com/1200_w_bench-scale_processor/

Sotax model HT100.500N automatic tablet testing system
- Auto alignment technology
- Measures tablet weight, thickness, width, diameter or length, and hardness
-Seperates tablets based on shapes & sizes
- Measuring range up to 1000 N
- 1 phase, 50-60 cycles, 115-230 volts,
- Serial #4529.026

Spee-Dee model 2000L auger filler
- Stainless steel
- Digitronic controls
- 20 gallon hopper capacity
- Accuracy: +/- 50mg
- Speed: up to 75 cycles/minute

Stainles steel 24 gallon tank.
-16" diameter x 28" measurements tank.

Stainless Steel Oven
- 48” long x 28” wide x 65” high internal dimensions
- Includes 3 trays
- Electrically heated
- 1/2 HP, 3 Ph, 60 cycles, 230 Volt motor

Stainless Steel 129 gallon Tank
- 31" diameter x 60" deep measurements tank
- 2" bottom center discharge
- Mounted on wheels

Stainless Steel 21 gallon electrically heated Jacketed Tank
- 19" diameter x 18" deep
- With agitator
- 1 1/2" side outlet discharge
- Electric heating coil with temperature controller
- 1/2 HP, 3 Phase, 60 cycles, 220 volt motor
- Mounted on casters

Stainless Steel 37 gallon tank
- 23 1/2" diameter x 20" deep
- With anchor type agitator with scrapers and elevator for rising and lowering
- With covers
- 2” bottom center discharge
- Mounted on base
- Manual height adjustment
- 1/4 HP, 3 Phase, 60 Hz, 220 volt motor

Stainless Steel Belt Conveyor
- 8" wide x 154" long belt conveyor
- with 16" "wide x 154" long stainless steel lateral work
- 33" legs high
- 1/2 HP, 3 Phase, 60 cycles, 220 volt motor

Stainless Steel Belt Conveyor
-17 1/2" width x 102" long belt conveyor
-25" height of legs
-1/2 HP, 3 Phase, 60 cycles, 220 volts motor

Stainless Steel Centrifugal Pump
-1" inlet = outlet
-1.5 HP, 3 Phase, 60 cycles, 220 Volts motor