Probst & Class model UV14 stainless steel colloid mill
- 2” diameter stainless steel rotor
- Stainless steel hopper
- 3/4” discharge
- Mounted on base with casters
- 2 HP, 3 Phase, 60 Hz, 220 volt motor
- Serial no. 10027

Prodo-Pak model T-60 tube filler
- Stainless steel
- Ultrasonic sealing
- Coder
- Elkay chiller
- Suitable for round & oval tubes
- Change parts to run 14mm, 18mm, 25mm, 30mm, 32mm, 36mm & 50mm diameter tubes
- Speed: up to 60 tubes/minute
- Tube diameter: 14-50mm
- Tube length: 70-205mm
- Tube fill volume: 2-250ml
- Serial #3220

Promatic model P150 automatic horizontal intermittent motion cartoner for blisters
- Intermittent motion
- Carton magazine feed
- Blister feeder
- Coder
- Manual adjustment for different carton sizes
- 3 HP, 3 Phase, 60 cycles, 220-440 volt motor
- Serial # 6097010

Propack 570 mm Double drum Slab Former
- Model CE3518, serial#80-08759 built 2009
- 570 mm wide x 460 mm diameter jacketed top roller
- 760 mm wide x 900 mm diameter jacketed bottom roller
- Teflon Hopper with stainless steel jacketed plates
- Scraper missing for bottom drum
- Each roller driven by a NEW 2-HP, 3 phase, 60 cycle, 230/460 volt motor (gearboxes are not new)

QUADREL Q10RH-MODULINE LABELER -
QUADREL MODEL Q10 PRESSURE SENSITIVE WRAPAROUND LABELER WITH ROLLER TYPE CONVEYOR FOR SMALL ROUND BOTTLES WITH 3.5" WIDE ROLLERS, MOUNTED ON CASTERS SET FOR 110 VOLTS.

Quadrel model Moduline pressure sensitive wraparound labeler
- 8' long x 4-1/2" wide conveyor
- Stainless steel
- Allen hot foil coder
- Up to 200 bottles/minute
- Dispensing speed: 1200”/minute
- On casters
- 1 phase, 60 cycles, 120 volts
- Serial #80543-01

Quadrel model Moduline pressure sensitive wraparound labeler
- 24" diameter stainless steel feed table
- 10’ long x 4-1/2" wide conveyor
- Stainless steel
- Markem Imaje SmartDate model X40 thermal transfer printer
- Up to 200 bottles/minute
- Dispensing speed: 1200"/minute
- 1 phase, 60 cycles, 110 volts
- Serial #81152-01

Quadrel model Moduline wraparound pressure sensitive labeler
- Serial #960020-2

Quadrel model Q110 pressure sensitive wraparound labeler
- 24" diameter stainless steel feed table
- 10' long x 4-1/2" wide conveyor
- Stainless steel
- 50 programmable product settings
- Touch screen programming
- Label detection sensor
- Markem Imaje SmartDate model X45 thermal transfer printer
- Label width: ½" – 6-7/8"
- Label length: ½" –
- Dispensing speed: 1600"/minute
- 1 phase, 60 cycles, 120 volts
- Serial #83805-100
- Manufactured in August 2023

Quadro Comill "type" stainless steel 17" diameter conical mill
- On stainless steel base on casters

Quadro model 193 stainless steel Comil
- Serial #0057

Quadro model 194 Comil
- Stainless steel
- Capacity: up to 5,000 lbs/hr
- Serial #194-1448

Quadro model 196S Comil
- Stainless steel
- 15 HP motor
- Capacity: up to 15,000 lbs/hr
- Serial #196-0847

Quadro model 197-T comil
Quadro model Comill 197-TT stainless steel mill
-Stainless steel hopper
- Stainless steel screen & rotor
-1 HP, 1 phase, 60 cycles, 115-230 volts motor
- Serial#197-0141

Quality Cup model QC-8 Rotary Cup Filler & Sealer
- Cup dispenser, piston filler, pre-cut lid placer and heat sealer
- Current cup size is 51 mm diameter x 31.75 mm tall (WinZip cup model CPM10011)
- Currently filling 1 ounce of vanilla flavoring into the cup (piston is 5 ounces)
- 5 gallon stainless steel hopper
- Machine size range: Max. diameter 3.125" x 3.5" tall (change parts required)
- Output: up to 45 cups/minute
- Serial#QC08-0922 built 2009

RMB Stainless Steel Z-Configuration Bucket Elevator
- Model LS100-91-SST, built 2014
- 120" long vertical section
- 52" infeed section
- 144" outfeed
- 72" long downward section at discharge
- Chain and buckets in box
- Bucket size: 12" x 4" x 3" deep
- 3 phase, 230/460 volt motor

RMB Stainless Steel Z-Configuration Bucket Elevator
- Model LS100-91-SST, built 2014
- 120" long vertical section
- 52" infeed section
- 144" outfeed
- 72" long downward section at discharge
- Chain and buckets in box
- Bucket size: 12" x 4" x 3" deep
- 3 phase, 230/460 volt motor

RMB Stainless Steel Z-Configuration Bucket Elevator
- Model LS100-91-SST, built 2014
- 120" long vertical section
- 52" infeed section
- 144" outfeed
- 72" long downward section at discharge
- Chain and buckets in box
- Bucket size: 12" x 4" x 3" deep
- 3 phase, 230/460 volt motor

RMB Stainless Steel Z-Configuration Bucket Elevator
- Model LS100-91-SST, built 2014
- 120" long vertical section
- 52" infeed section
- 144" outfeed
- 72" long downward section at discharge
- Chain and buckets in box
- Bucket size: 12" x 4" x 3" deep
- 3 phase, 230/460 volt motor