New NEC Stainless Steel Jacketed and Agitated Cooking & Mixing Kettles - 50 Galllon S/A
- 50 Gallon: 35" diameter x 45" deep, 3 HP motor (2 HP secondary agitator)
- 316 SS product surfaces. Non-Product contact surfaces 304 SS
- Agitator offered both single and double action
- Jacket rated for 125 psi (can quote with lower pressures)
- Tri-Leg configuration with flanged feet
- 3" center bottom discharge with ball valve
- Agitator with Nord brand motor/gearbox - bridge mounted
- Tri-clamp additive ports in cover
- Stainless steel hinged cover on both sides
- Custom kettles are available

New NEC Stainless Steel Double Ribbon Blenders
- Capacity: 1 to 200 cu/ft or 7.5 through 1,496 gallons
- Motor: 1 HP- 30 HP, 220/440 volt
- RPM: 27 through 71
- Lids & Grates: 1 through 2
- Discharge: Manual butterfly valve
- Safety switch
- Bowl Dimensions: 17.7" (L) x 11" (W) x 13" (H) through 118" (L) x 59" (W) x 64" (H)
- Overall Dimensions: 32.8" (L) x 16.3" (W) x 34.1" (H) through 152" (L) x 101" (W) x 140.5" (H)

$8,450.00 NEC 1 cu. ft. Stainless Steel Double Ribbon Blenders
$9,750.00 NEC 2.5 cu. ft. Stainless Steel Double Ribbon Blenders
$12,250.00 NEC 5 cu. ft. Stainless Steel Double Ribbon Blenders
$19,750.00 NEC 10 cu. ft. Stainless Steel Double Ribbon Blenders
$22,250.00 NEC 15 cu. ft. Stainless Steel Double Ribbon Blenders
$27,750.00 NEC 25 cu. ft. Stainless Steel Double Ribbon Blenders
$33,250.00 NEC 35 cu. ft. Stainless Steel Double Ribbon Blenders
$34,250.00 NEC 36 cu. ft. Stainless Steel Double Ribbon Blenders
$42,500.00 NEC 50 cu. ft. Stainless Steel Double Ribbon Blenders
$44,250.00 NEC 60 cu. ft. Stainless Steel Double Ribbon Blenders
$49,250.00 NEC 75 cu. ft. Stainless Steel Double Ribbon Blenders
$64,250.00 NEC 100 cu. ft. Stainless Steel Double Ribbon Blenders
$72,750.00 NEC 150 cu. ft. Stainless Steel Double Ribbon Blenders
$89,500.00 NEC 200 cu. ft. Stainless Steel Double Ribbon Blenders

New NEC Stainless Steel Jacketed and Agitated Tilting Cooking & Mixing Kettles
- 316 SS Product surfaces. Non-Product contact surfaces 304 SS
- Agitator offered both single and double action
- Jacket rated for 125 psi (can quote with lower pressures)
- Tri-Leg configuration with flanged feet
- Manual tiling mechanism
- 3" center bottom discharge with ball valve
- Agitator with Nord brand motor/gearbox - bridge mounted
- Tri-clamp additive ports in cover
- Stainless steel hinged cover on both sides
- Custom kettles are available

25 Gallon: 31.5" diameter x 41" deep, 3 HP motor (2 HP secondary agitator)
50 Gallon: 35" diameter x 45" deep, 3 HP motor (2 HP secondary agitator)
75 Gallon: 39" diameter x 49" deep. 3 HP motor (2 HP secondary agitator)
100 Gallon: 39" diameter x 53" deep, 3 HP motor (2 HP secondary agitator)

Pricing Single and Double Action Agitation (only 100 gallon is offered in double action)

New NEC Stainless Steel Jacketed and Agitated Tilting Cooking & Mixing Kettles-100 Gallon D/A
- 100 Gallon: 39" diameter x 53" deep, 3 HP motor (2 HP secondary agitator)
- 316 SS Product surfaces. Non-Product contact surfaces 304 SS
- Agitator offered both single and double action
- Jacket rated for 125 psi (can quote with lower pressures)
- Tri-Leg configuration with flanged feet
- Manual tiling mechanism
- 3" center bottom discharge with ball valve
- Agitator with Nord brand motor/gearbox - bridge mounted
- Tri-clamp additive ports in cover
- Stainless steel hinged cover on both sides
- Custom kettles are available

New NEC Stainless Steel Jacketed and Agitated Tilting Cooking & Mixing Kettles-100 Gallon S/A
- 100 Gallon: 39" diameter x 53" deep, 3 HP motor (2 HP secondary agitator)
- 316 SS Product surfaces. Non-Product contact surfaces 304 SS
- Agitator offered both single and double action
- Jacket rated for 125 psi (can quote with lower pressures)
- Tri-Leg configuration with flanged feet
- Manual tiling mechanism
- 3" center bottom discharge with ball valve
- Agitator with Nord brand motor/gearbox - bridge mounted
- Tri-clamp additive ports in cover
- Stainless steel hinged cover on both sides
- Custom kettles are available

New NEC Stainless Steel Jacketed and Agitated Tilting Cooking & Mixing Kettles-25 Gallon S/A
- 25 Gallon: 31.5" diameter x 41" deep, 3 HP motor (2 HP secondary agitator)
- 316 SS Product surfaces. Non-Product contact surfaces 304 SS
- Agitator offered both single and double action
- Jacket rated for 125 psi (can quote with lower pressures)
- Tri-Leg configuration with flanged feet
- Manual tiling mechanism
- 3" center bottom discharge with ball valve
- Agitator with Nord brand motor/gearbox - bridge mounted
- Tri-clamp additive ports in cover
- Stainless steel hinged cover on both sides
- Custom kettles are available

New NEC Stainless Steel Jacketed and Agitated Tilting Cooking & Mixing Kettles-50 Gallon S/A
- 50 Gallon: 35" diameter x 45" deep, 3 HP motor (2 HP secondary agitator)
- 316 SS Product surfaces. Non-Product contact surfaces 304 SS
- Agitator offered both single and double action
- Jacket rated for 125 psi (can quote with lower pressures)
- Tri-Leg configuration with flanged feet
- Manual tiling mechanism
- 3" center bottom discharge with ball valve
- Agitator with Nord brand motor/gearbox - bridge mounted
- Tri-clamp additive ports in cover
- Stainless steel hinged cover on both sides
- Custom kettles are available

New NEC Stainless Steel Jacketed and Agitated Tilting Cooking & Mixing Kettles-75 Gallon S/A
- 75 Gallon: 39" diameter x 49" deep. 3 HP motor (2 HP secondary agitator)
- 316 SS Product surfaces. Non-Product contact surfaces 304 SS
- Agitator offered both single and double action
- Jacket rated for 125 psi (can quote with lower pressures)
- Tri-Leg configuration with flanged feet
- Manual tiling mechanism
- 3" center bottom discharge with ball valve
- Agitator with Nord brand motor/gearbox - bridge mounted
- Tri-clamp additive ports in cover
- Stainless steel hinged cover on both sides
- Custom kettles are available

New NEC Stainless Steel V Blenders
- Capacity: 5 cu. ft. through 75 cu. ft.
- Motor: 3 HP to 7 HP, 3 phase, 60 cycles 220/440 volts 5 cu. ft. to 75 cu. ft.
- RPM: 8 to 12
- Discharge Diameter: 4" to 8"
- Working Dimensions: 67" (L) x 22" (W) x 63" (H) through 126" (L) x 47" (W) x 112" (H)

$7,950.00 New NEC 5 cu. ft. 304 Stainless Steel V Blenders
$8,250.00 New NEC 5 cu. ft. 316L Stainless Steel V Blenders
$8,650.00 New NEC 5 cu. ft. 304 Stainless Steel V Blenders with inensifier bar
$8,950.00 New NEC 5 cu. ft. 316L Stainless Steel V Blenders with inensifier bar
$13,450.00 New NEC 10 cu. ft. 304 Stainless Steel V Blenders
$13,850.00 New NEC 10 cu. ft. 316L Stainless Steel V Blenders
$14,150.00 New NEC 10 cu. ft. 304 Stainless Steel V Blenders with inensifier bar
$14,550.00 New NEC 10 cu. ft. 316L Stainless Steel V Blenders with inensifier bar
$19,750.00 New NEC 20 cu. ft. 304 Stainless Steel V Blenders
$20,250.00 New NEC 20 cu. ft. 316L Stainless Steel V Blenders
$20,450.00 New NEC 20 cu. ft. 304 Stainless Steel V Blenders with inensifier bar
$20,950.00 New NEC 20 cu. ft. 316L Stainless Steel V Blenders with inensifier bar
$29,750.00 New NEC 50 cu. ft. 304 Stainless Steel V Blenders
$31,250.00 New NEC 50 cu. ft. 316L Stainless Steel V Blenders
$30,450.00 New NEC 50 cu. ft. 304 Stainless Steel V Blenders with inensifier bar
$31,950.00 New NEC 50 cu. ft. 316L Stainless Steel V Blenders with inensifier bar
$34,550.00 New NEC 75 cu. ft. 304 stainless Steel V Blenders
$36,750.00 New NEC 75 cu. ft. 316L stainless Steel V Blenders
$35,250.00 New NEC 75 cu. ft. 304 stainless Steel V Blenders with inensifier bar
$37,950.00 New NEC 75 cu. ft. 316L stainless Steel V Blenders with inensifier bar

New Stainless Steel Coating Pans - 38" Pear Shaped Pan
-All pans made of 316 stainless steel
-2.75" shaft diameter
-Heavy duty pillow block bearings
-SEW gear drive
-23 degree shaft angle
-3 HP, 3 phase, 60 cycle, 208-360 volt motor
-Variable speed frequency controller
38" Pear Shaped Pan: 38" diameter x 32" deep x 24" diameter opening

New Stainless Steel Coating Pans - 42" Angular Pan
-All pans made of 316 stainless steel
-2.75" shaft diameter
-Heavy duty pillow block bearings
-SEW gear drive
-23 degree shaft angle
-3 HP, 3 phase, 60 cycle, 208-360 volt motor
-Variable speed frequency controller
42" Angular Pan: 42" diameter x 38" deep x 24" diameter opening

New Stainless Steel Coating Pans - 42" Pear Shaped Pan
-All pans made of 316 stainless steel
-2.75" shaft diameter
-Heavy duty pillow block bearings
-SEW gear drive
-23 degree shaft angle
-3 HP, 3 phase, 60 cycle, 208-360 volt motor
-Variable speed frequency controller
42" Pear Shape Pan: 42" diameter x 37" deep x 24" diameter opening

New Stainless Steel Coating Pans - 42" Round Shaped Pan
-All pans made of 316 stainless steel
-2.75" shaft diameter
-Heavy duty pillow block bearings
-SEW gear drive
-23 degree shaft angle
-3 HP, 3 phase, 60 cycle, 208-360 volt motor
-Variable speed frequency controller
42" Round Shape Pan: 42" diameter x 39" deep x 24" diameter opening

New Stainless Steel Coating Pans - 48" Pear Shaped Pan
-All pans made of 316 stainless steel
-2.75" shaft diameter
-Heavy duty pillow block bearings
-SEW gear drive
-23 degree shaft angle
-3 HP, 3 phase, 60 cycle, 208-360 volt motor
-Variable speed frequency controller
48" Pear Shaped Pan: 48" diameter x 39.5" deep x 24" diameter opening

New Stainless Steel Coating Pans - 48" Round Shaped Pan
-All pans made of 316 stainless steel
-2.75" shaft diameter
-Heavy duty pillow block bearings
-SEW gear drive
-23 degree shaft angle
-3 HP, 3 phase, 60 cycle, 208-360 volt motor
-Variable speed frequency controller
48" Round Shape Pan: 45" diameter x 45" deep x 24" diameter

New Tinsley 100/100lb over and under stainless steel water jacketed chocolate melters
Both melters driven by one bottom mounted drive motor. Each tank has its own electric heater and digital thermostat.
Motor 3/60/220v

New Tinsley 200/200lb over and under stainless steel water jacketed chocolate melters
Both melters driven by one bottom mounted drive motor. Each tank has its own electric heater and digital thermostat.
Motor 3/60/220v

New Tinsley 300/300lb over and under stainless steel water jacketed chocolate melters
Both melters driven by one bottom mounted drive motor. Each tank has its own electric heater and digital thermostat.
Motor 3/60/220v

New Tinsley 500/500lb over and under stainless steel water jacketed chocolate melters
Both melters driven by one bottom mounted drive motor. Each tank has its own electric heater and digital thermostat.
Motor 3/60/220v

NEW TINSLEY BELT COATERS 60"
Tinsley 60" Chocolate Belt Coaters.

This belt coater is constructed completely of stainless steel with a food grade polypropylene belt and sidewalls. Using a heated top scraper to return maximum of the chocolate from the belt surface back into the processed product.

60" coater: 300 to 600 lbs/hr

Includes the following:

· Intralox Series 800 mat top belting and complete with all necessary UHMWP carry-way support wear strips. Driven by a 3 HP motor, 1750 RPM, complete with the gearbox for a final output
of 76 RPM, or a linear belt speed of up to 200-FPM max. Drive motor controlled via variable frequency speed controller for belt speed adjustment from 0 - 200 FPM. This will allow for excellent product tumble and uniform product coating at its proper belt speed for the different products.
The chocolate feed will be controlled by a variable speed water-jacketed chocolate pump feeding directly into a center fed water-jacketed drip manifold. The drip nozzles of 3-mm diameter will be on 2" centers,
Allowing for a good chocolate feed for uniform product coating. This coater will be equipped with 27 drip nozzles. Manifold is secured in place with sanitary fittings for easy removal and cleaning. It includes a self-contained heating system with adjustable immersion heater and circulating pump.

· To prevent product traveling with the belt, an electrically heated scraping/retaining bar spaced about 1/16" from the belt surface will scrape the product off the belt and drop it down to the other product area for reuse and processing. This will minimize chocolate waste.

· A final belt surface scraper bar will be installed against the bottom of the belt to remove any excess chocolate from the belt surface. This chocolate will be collected within the easy removable collecting pan for reuse and return to the melting tank. This trolley assembly with the collecting pans will be floor supported, therefore not affect the load cells.

· An interior light will light up the product processing area for easy inspection during the processing.

· Lexan front doors will allow for easy product access and inspection.

· Basic machine with manual controls and wired for 230 Volts, 3 Ph., 60 Hz., with main disconnect

· Machine size and weight:

60" Belt Coater - 91" long x 76" deep x 86" height; about 3,000 pounds

Electrical and control features:

1. Nema 12 Electrical Enclosure mounted on hinges for rear access to machine. (Panel can be Lockout tag out main disconnect. (Fused with low peak Type J fuses.)
2. Main MCR for E-stop circuit.
3. Allen Bradley PLC with Ethernet communication to display. (This feature allows easy interfacing with a SCADE information or control system.)
4. Color 6 in touch screen with Ethernet IP communications.
5. Allen Bradley Power Flex 4 drive with display.
6. Circuit breakers for control wiring and power protection.
7. Stack light to show status of machine and completion of batch cycle.
8. Load cell control is a four channel input controller.
9. No electrical custom design parts .(Replacements parts should be locally available)
10.Maintenance screens in display for manual operation of all electrical devices.
11. On the fly recipes adjustment.
12. Watch screen to monitor cycle position. (See what step you are on how much time is left.)
13. Displays Current weight on display.
14. Adjustable run and unload speeds.
15 Tare button to zero out load cells.
16. Spray system controls can be tested offline so that setup can be accomplished without wasting product.