BEST PACK MODEL MS22-3, SERIAL NUMBER 011063
BEST PACK MODEL MS22-3, TOP AND BOTTOM PRESSURE SENSITIVE CASE TAPER SERIAL NUMBER 011063, WITH SIDE PULL-THROUGH BELTS, 1/5 HP, 110 V, 1 PH, 1750 R.P.M., CASE TAPER DIMENSIONS 30" LONG X 46" WIDTH X 64" HEIGHT

BFB IMA Model K150 Automatic Reverse Tuck Horizontal Cartoner
- Max box 30x10
- Max product length 12
- K150
- S/N 89240
- With Manuals
- 220V, 15A, 15 KVA, 3ph, 60Hz
- (380x150x190)

BFB MS500-S BOX WRAPPER
BFB MODEL MS-500-S AUTOMATIC BOX WRAPPER, 24" SEALER WITH 4 1/2" WIDTH X 31" LONG CONVEYOR, VARIABLE SPEED, 1 HP, 220-440 V, 3 PH, 1720 RPM

MINIMM PACKAGE DIMENSIONS: 60 X 30 X 60MM
MAXIMUM PACKAGE DIMENSIONS: 300 X 170 X 280MM
SPEED: UP TO 35 PACK

BOX WRAPPERS,WITH L BAR
CONFLEX MODEL E250HS AUTOMATIC BOX WRAPPERS, WITH L BAR 17 1/2" WIDTH X 22" LONG SEALED AREA, 1/8 HP, 90 V CD, 1 PH 1750 R.P.M.

Buflovak 18" Wide Stainess Steel Drum Flaker with Top Applicator Roller
- 3" diameter x 18" wide stainless steel top applicator roller
- 12" diameter x 18" wide stainless steel jacketed bottom roller
- Product hopper
- National board#9139
- Rated at 160 psi at 350 degrees F
- Serial#18462 built 1993
- Top roller driven by 1-HP, 3 phase, 60 cycle, 230/460 volt motor
- Bottom roller driven by 1.5 HP, 3 phase, 60 cycle, 230/460 volt motor
- Previously used by Unilever R&D soap facility

BWI Manesty stainless steel table deduster.
-1/4 HP 1 Phase, 60 Cycles, 110 Volts motor.

Backsaver BRL Stainless Steel Drum Dumper
- For emptying barrels, drums or cylinder shaped containers
- 650 lb max weight
- Rechargeable battery
- Single hydraulic cylinder

BairesPack Pre-made Doy Pouch Machine with 4-lane Linear Scale
Pre-made Pouch Machine:
- Model Milan-1
- Serial#2001003 built 2020
- Sealing jaws 11.75" wide
- 3.25" diameter filling funnel to pouch
- Bag width: 3-7/8" - 10"
- Bag Length: 8.25" - 14" long
- Output: 5 to 10 packs per minute
- 3 phase, 60 cycle, 220 volts
- Panasonic 7" color touch screen

Scale:
BairesPack Model GSLO-4-2
- 4 head linear scale
- Serial#190515 built 2019
- Single phase, 220 volts
- Weigh range: 0.70 to 70 ounces
- Max speed: 55 P/minute
- Hopper volume 3 liters
- Touch screen controller
- Includes stand for scale
BairesPack Cleated Belt Bucket Elevator
- Model TM-AC-S2500
- SS vibratory hopper approx.28" x 28" x 21" deep
Cleated inclined conveyor
- 12" wide belt with 2" tall cleats on 10.5' centers
- Dump height 10-ft

Baker Perkins Model MP24 Twin Screw Extruder
- Serial# 7221 - Built new in 2015
- 18kW motor
- Jacketed extrusion chamber
- 1” diameter x 24” long screws - (2) sets with the machine
- Fly knife cutter
- Ice Cool Energy water chiller
- 3 phase, 60 cycle, 460 volts
- Mounted on casters
- Cart of spare parts
- Control panel with PLC and HMI

Lab unit or for small batch production

A variety of foods and ingredients ranging from standard direct expanded to more complex, multi-component premium and filled products can all be produced on the MPF24. Ingredients are texturised and cooked through a combination of heat, mechanical shear and moisture addition. Flavours and colours can be added easily to make any kind of extruded food product.

Bakon Transfer Pump (new - never used)
- BOM#000008613.a11, Production#710623/01 built 2021
- Power 100 W
- 50/60 HZ, 230 volts
The Transfer Pump is suitable for many types of products, such as fruit fillings, fillings containing pieces of fruit e.g. apple, apricot or whole cherries, but also creams, cake batters etc. The only requirement is that the product is able to flow to the entrance of the pump. With this machine cherries remain whole, pieces of apple are not crushed and cake batter retains its airy volume.

Baldor model LT2555-334 centrifugal pump
Stainless Steel Centrifugal pump
-1/2" inlet & outlet
-Baldor model LT2555-334 motor
-1/2 HP, 3 Phases, 60 cycles, 220-440 volts motor

Bar Forming Slab Line - 11" Wide
- Double drum former with (2) 11" wide jacketed rollers with hopper
- (3) 11" wide x 20" diameter jacketed Gauging Rollers
- Forming conveyor 11" wide x 117.5" long
- Cooling Tunnel 13.5" wide x 85" long
- Slitter assembly with (11) blades on 1.5"centers
- Guillotine cutter mechanical type with timer and 13.5" wide knife
- 13.5" wide x 50" long conveyor for slitter and cutter
- Overall dimensions: 22" wide x 33-ft long
- 3 phase, 240 volts, 30 amps

Bartelt automatic pouch former
Bartelt automatic Pouch former
-Horizontal pouch former
- 7.5" centers
-4 sided seal pouch
-Auger filler with agitator
- 8" long Vertical and 8" wide horizontal sealing jaw
- 21 bag clamps
- Venturi vacuum system
- Electric eye for printed film
-

Bartelt model IM7 Pouch Packager with AMS Auger Filler
- 12" vertical seal bar
- 7" wide bottom seal bar
- 7" wide top seal bar
- Two stations for filling with vacuum cup opener
- AMS SIngle Auger Filler with hopper and stand
- 3 phase, 230 volts
- Serial#2306

Bartelt model IM7-12 Pouch Packager with AMS Auger Filler
- 9" vertical seal bar
- 7" wide bottom seal bar
- 7" wide top seal bar
- Single station for filling with vacuum cup opener
- AMS SIngle Auger Filler with hopper, auger and stand
- Venturi vacuum system
- Mounted on casters
- 3 phase, 460 volts
- Serial#1183

Barth Sirroco 300 Ball Roaster
- Fully rebuilt in 2016
- Never used after rebuild
- Serial number 228735
- Natural gas fired
- 160kg per batch
- 480kg per hour
- Cooler
- Control panel
- Motor 3/60/415v
- Footprint 4m x 3.2m x 2.9m high
- Weight 4000kg

Bauer 322 1000 lb/hr Batch Dry Nut Roaster
- Roaster will be completely rebuild - 16 week lead time
- Complete disassembly of roaster
- Sand blast frame, clean and paint
- New stainless steel hopper
- New gas train set for LPG or NG
- 500,000 btu/hr
- New air/gas mix blower
- New ceramic burners
- New control panel
- New temperature probe and controller
- Complete documentation (electrical, mechanical, operating instructions)
- Does not include a cooling cart
- Photo and video is of previously rebuilt roaster

Bauer model 341-B Split Nut Blancher
- Rated up to 2000 lb/hr
- Built in cyclone
- Sifter/separator to remove hearts
- 1.5 HP, 3 phase, 60 cycle, 230/460 volt

Bauermeister Model DW51 3-Roll Refiner
- Used in a chocolate plant
- Serial number 29064
- Granite rolls 1000mm x 400mm diameter
- Product scraper
- 25HP 3/60/220v motor

Bausch & Stroebel model FAW500 bottle washer
- 16 arms with single nozzle
- For 9.5 cm bottle diameter neck
- 3/4 HP, 3 Phase, 60 cycles, 220-380 volt motor
- Serial no. 4517