NEW TINSLEY 3-FT X 8-FT STAINLESS STEEL COLD TABLE WITH ONE SET OF 3/4" NON-FIXED BARS

- 3-FT X 8-FT
- 3-FT X 6-FT
- COST OF OPTIONAL HINGED SIDE-MOUNTED BARS,

THESE TABLES ARE FABRICATED USING 10 GAUGE STAINLESS STEEL METAL. THE TABLES HAVE ADJUSTABLE LEGS AND A SEPARATE LEVELING ADJUSTMENT UNDERNEATH THE TABLE. THE PLATE COIL IS RATED FOR 190 PSI UP TO 500 DEGREES F.

Nagema EU8 Double Twist Wrapper
- Built new in 1991
- Serial number 13361110
- Set for a 1" diameter truffle ball
- Mechanical twisters / no heat seal
- Vibratory bowl feeder
- Feed plate
- Up to 600ppm for hard candy
- 3/60/220v

Nalbach model 36 Unscrambler
- Stainless steel hopper
- 35” diameter x 9” height stainless steel bowl
- 2” wide x 40” long conveyor
- 2 HP, 3 Phase, 60 Hz, 220 volt motor

Nash Hytor Model TS-7 Vacuum Pump
-By recirculating water
-1" inlet, 1/2" outlet
-3 HP, 3 Phase, 60 Cycles, 220-440 Volt motor

National 32” Stainless Steel Enrober
- Two jacketed chocolate pumps
- Jacketed chocolate reservoir
- Blower with blower manifold
- Flow pan
- Detailer
- Control panel
- 3 phase, 60 cycle, 220 volts

Nec model EM stainless steel
tablet counter
-With vibratory hopper
-17" diameter glass turntable
-Twin funnels
-PLC Siemens
-1/25 HP, 1 phase, 60 cycles, 110 volts motor

New APV Model PHE Stainless Steel Plate Heat Exchanger
- 126 stainless steel plates
- 35” long x 19” wide x 62” high plates dimensions
- 2 ½” inlet & outlet
- 10 °C minimum temperature design
- 90 °C maximum temperature design
- 10 bar pressure design
- 14 bar pressure test

New Adept ATR B 10 Station Tablet Press
- 10 Stations
- B Tooling
- GMP
- Pre-compression
- 3 HP motor to meet your eletrical requirements
- Output: up to 18,000 tablets/hr
- Maximum tablet diameter: 18.5 mm
- Maximum depth of fill: 18 mm
- Maximum operating pressure: 6 tons
- Machine dimensions: 63 x 86 x 120 cms
- Machine weight: 450 kgs
Optional stainless steel table with 2 drawers with locks: $1,500.00

New Adept ATR B and D Tablet Press
- 8 Stations
- (4) D and (4) B Tooling
- GMP
- Pre-compression
- 3 HP motor to meet your electrical requirements
- Output: up to 14,400 tablets/hr
- Maximum tablet diameter: 25mm D/18.5 mm B
- Maximum depth of fill: 18 mm
- Maximum operating pressure: 6 tons
- Machine dimensions: 63 x 86 x 120 cms
- Machine weight: 450 kgs
Optional stainless steel table with 2 drawers with locks: $1,500.00

New Adept ATR D 8 Station Tablet Press
- 8 stations
- D Tooling
- GMP
- Pre-compression
- 3 HP motor to meet your electrical requirements
- Output: up to 14,400 tablets/hr
- Maximum tablet diameter: 25 mm
- Maximum depth of fill: 18 mm
- Maximum operating pressure: 6 tons
- Machine dimensions: 63 x 86 x 120 cms
- Machine weight: 450 kgs
Optional stainless steel table with 2 drawers with locks: $1,500.00

New Adept model ADR 27 Station Double Sided Tablet Press
- D tooling
- Double keyed
- GMP model
- Knob controls for tablet weight and thickness
- A.C. speed variator
- Auto lubrication
- 5 HP, 1440 RPM motor

Maximum tablet diameter: 25 mm
Maximum tablets/hour: 97,200
Maximum fill depth: 17.5 mm
Maximum pressure: 10 tons
Machine dimensions: 42" x 43" x 63"

New Adept model ADR 35 Station Double Sided Tablet Press
- B tooling
- Double keyed
- GMP model
- Knob controls for tablet weight and thickness
- A.C. speed variator
- Auto lubrication
- 5 HP, 1440 RPM motor

Maximum tablet diameter (round): 18.5 mm
Maximum tablet diameter (caplet): 19 mm
Maximum tablets/hour: 159,600
Maximum fill depth: 17.5 mm
Maximum pressure: 10 tons
Machine dimensions: 42" x 43" x 63"

New Adept model ADR 45 Station Double Sided Tablet Press
- B tooling
- Double keyed
- GMP model
- Knob controls for tablet weight and thickness
- A.C. speed variator
- Auto lubrication
- 5 HP, 1440 RPM motor

Maximum tablet diameter (round): 13 mm
Maximum tablet diameter (caplet): 16 mm
Maximum tablets/hour: 205,200
Maximum fill depth: 17.5 mm
Maximum pressure: 10 tons
Machine dimensions: 42" x 43" x 63"

New Adept model ADR 59 Station Double Sided Tablet Press
- BB tooling
- Double keyed
- GMP model
- Knob controls for tablet weight and thickness
- A.C. speed variator
- Auto lubrication
- 5 HP, 1440 RPM motor

Maximum tablet diameter (round): 10 mm
Maximum tablets/hour: 269,040
Maximum fill depth: 17.5 mm
Maximum pressure: 6.5 tons
Machine dimensions: 42" x 43" x 63"

New CVC (Cremer) model 1220 High Speed Electronic Channel Counter
- 12 channels, each with an infrared sensor
- LD hand held terminal (Touch screen PC terminal optional)
- Infeed and outfeed track sensors
- Auto dust compensation with dual vacuum ports
- Count verification and rejection
- Stainless steel construction
- 50 job memory capacity
- Quick and simple change over

Tablet/capsule/soft gel width/diameter: 1/8" - 3/4"
Tablet/capsule/soft gel length: 1/8" - 1-3/16"
Bottle height: 1-1/2" - 7-3/4"
Bottle diameter: 3/4" - 4"
Capacity: Up to 55 bottles per minute on a 100 count fill

New CVC (Cremer) model 1620 High Speed Electronic Channel Counter
- 16 channels, each with an infrared sensor
- Can be set up to run one bottle using all 16 channels, or two bottles using 8 channels
- Touch screen PC terminal
- Infeed and outfeed track sensors
- Auto dust compensation with dual vacuum ports
- Count verification and rejection
- Stainless steel construction
- 50 job memory capacity
- Quick and simple change over

Tablet/capsule/soft gel width/diameter: 1/8" - 3/4"
Tablet/capsule soft gel length: 1/8" - 1-3/16"
Bottle height: 1-1/" - 7-3/4"
Bottle diameter: 3/4" - 4"
Capacity:
- Single bottle - up to 70 bottles per minute on a 100 count fill
- Double bottle - up to 100 bottles per minute on a 90 count fill

New CVC 100 Pressure Sensitive Labeler
- Rated at 105’ of label per minute
- Labelset system auto system
- Die cast labeling heads
- Label and product sensors
- Stainless steel construction
- Stepper motor drives for: label feed
- Mounted on portable stand
- Upgradable for future hot stamp install
- Vertical and horizontal adjustability
- Stepper motor drive

New CVC model 1103 Pouch Desiccant Inserter
- Stainless steel
- Cuts desiccant packets from a roll and inserts
- PLC driven & servo motor conrolled with 6" touchscreen terminal
- 10 job memory capacity
- Interlocked safety shield
- 1 - 5 pouch insertions per bottle
- Single phase, 50/60 cycles, 220 volts
- Up to 120 bottles/minute
- Pouch length: 1-3/16" - 2-3/8"
- Pouch width: 5/8" - 1"
- Bottle diameter: 1-1/4" - 4-1/4"
- Bottle height: 2" - 7-3/4"
- Bottle opening: 1" - 4-1/4"

New CVC model 1117 Cottoner
- Stainless steel
- Works with cotton polyester and rayon
- PLC driven & servo motor controlled with 6" touchscreen terminal
- 10 job memory capacity
- Interlocked safety shield
- Optional missing cotton reject system
- On casters with easy height adjustment
- Single phase, 50/60 cycles, 220 volts
- Up to 60 bottles/minute
- Strip length: 2-1/4" - 6"
- Bottle diameter: 1-1/4" - 4-1/4"
- Bottle height: 2" - 8-1/2"
- Bottle opening: 1" - 2"

New CVC model 1117-2 Dual Head Cottoner
- 2 cottoners mounted on a single frame
- Stainless steel
- Works with cotton, polyester and rayon
- PLC driven & servo motor controled with 6" touchscreen terminal
- 10 job memory capacity
- Interlocked safety shield
- Optional missing cotton reject system
- On casters with easy height adjustment
- Single pase, 50/60 cycles, 220 volts
- Up to 120 bottles/minute
- Strip length: 2-1/4" - 6"
- Bottle diameter: 1-1/4" - 4-1/4"
- Bottle height: 2" - 8-1/2"
- Bottle opening: 1" - 2"