Siemens centrifugal pump
- 1 ½" inlet = outlet
- With stainless steel cover
- 1 HP, 3 Ph, 60 cycles 220 - 440 volt motor

Sig Model C Chocolate Bar Wrapper
- Foil and label from roll stock
- Cold glue system
- Set for a bar measuring approximately 120 x 75 x 9.5 mm thick
- Output: up to 100 bars/minute
- Size range: 79 x 31 x 6 up to 165 x 79 x 19 mm
- 3 phase, 220 volts

Signode Little David case erector & Magnum case taper
- Signode Little David model CF-5 semi-automatic case erector
- Allen Bradley Micro800 PLC
- On casters
- 1 phase, 60 cycles, 115 volts
- Up to 6 cases/minute
- Length range: 6" -26.5"
- Width range: 5" – 20"
Highlight Magnum model 4500 top 7 bottom case taper
- 2 settings: Random & Memory
- 2" tape heads
- Air operated side belts
- On casters
- Up to 20 cases/minute

Sihi Model LPHB3704 Carbon Steel Vacuum Pump
-By recirculating water
-1" inlet & outlet
-3 HP, 3 Phase, 60 cycles, 220-440 Volt motor

Silver State Stainless Mix Brew Tank,
- 30 Barrel Mash Tun Capacity.
- Approximately 1800 Gallons. 304 Stainless Steel.
- Approximately 84" diameter x 66" straight side.
- Dished Top, Flat Bottom. 90psi max jacket inlet pressure.
- Anchor Style Bar Agitation, driven by approximate 3hp 3/60/230/460v 1720rpm motor through a reducer 222.40:1 ratio.
- Openings Top: 24" manway with cover, 8" for agitator, 4", 2", 1", Side: 21" manway, 3", 1-1/2", 1" bottom, 2" side bottom outlet with 46" discharge height. - Mounted on (4) stainless steel legs.
- Serial# 375. Stock# 53458007

Silverson 25 HP Stainless Steel High Shear Homogenizing Mixer
- “Drop-In” explosion proof motor
- 25 HP 3/60/230-460 volt 3,510 RPM Explosion Proof motor-
- Approximately 32" long stainless steel shaft
- Last used in personal care products business

Silverson model 3X High Shear Mixer on stand
- Serial#2CM2075
- 1 HP, 3 phase, 50 cycle, 240/415 volts, 2850 rpm
- Speed controller
- Silverson model D portable stand

Simplex Automatic 2-Head Piston Filler with Feed Tables
- New 2022
- Simplex model AS-2 automatic piston filler
- Rotary 30" diameter stainless steel feed and accumulating tables
- (2) sets of pistons with U-seals: 1-1/8" diameter for 1.1 to 2.7 ounces. 1-7/8" diameter for 3 to 8.8 ounces (for flammable, sticky, acidic or abrasive products)
- 10 gallon 304 SS cone shaped hopper with two outlets
- Air-operated plug spout for no drip filling
- Plunging spout assembly for in container filling
- Neck centering device air-operated
- Drip tray air-operated
- Siemens control system
- Operator control panel
- Air-operated indexing system
- No container/no fill sensor
- Powder coated frame
- Heavy duty casters

Single door misc. oven
-2 internal section of 22" long x 29" width x40" height
-Missing trays
-Electrical heated coil
-1/2HP, 3phase, 60 cycles, 220-440 volts motor

Skerman 38" SS Coating Pan w Ribs
- Stainless steel
- Enclosed base
- Serial number 3110296
- 25" opening
- 38" deep
- (5) sanitary ribs
- 2HP 3/60/230v
- Speed controller
- Converter incoming single to three phase

Sollich 42" Inclusion Feeder
- Stainless Steel Hopper
- 42.5" wide belt width (35.5" between the nylon guides)
- ½ HP, 3 phase, 60 cycle, 480 volt motor

Sollich Auger/Mixing Screw
- 12" diameter x 44" long auger
- Stainless Steel jacketed trough
- 2 HP, 3 phase, 60 cycle, 277/460 volt motor

Sollich Double Layer Slab Line with Sollich Enrober
- Spec Engineering Cooling Drum 40" diameter x 16" wide, mounted on top of Sollich WEB-400 double drum former. Drum is stainless steel with non-stick coating, internal water spray system, water pump, water to water heat exchanger, 3-way caramel in-take valve, 1 HP drum drive with VFD
- Sollich WEB-400 Double Drum Conbar Slab Former, serial#0264 built 1993 with glycol chiller
- Sollich WET-400 single drum former for second layer (caramel, nougat, fudge)
- Small gauging roller
- Sollich cooling tunnel before slitting and cutting is not included
- Bepex Hutt type SG1200 Slitter and Spreader set for 3/8" wide strips, serial#50025 built 1993
- Bepex Hutt type SZ1200 Guillotine Cutter serial#50026 built 1993
- Sollich TS-820 820 mm Enrober with built-in tempering serial#0844 built 1969 (Enrober cooling tunnel is not included in the sale)
- This line creates a 16" wide slab that spreads out to approximately 22" wide

Sono Mechanics BSP-1200 Ultrasonic Liquid Processor
- Flow through attachment
- Producing nano emulsions
- Full wave Barbell horn
- Batch processor attachment
- Filter
- See link to OEM website: https://www.sonomechanics.com/1200_w_bench-scale_processor/

Sotax model HT100.500N automatic tablet testing system
- Auto alignment technology
- Measures tablet weight, thickness, width, diameter or length, and hardness
-Seperates tablets based on shapes & sizes
- Measuring range up to 1000 N
- 1 phase, 50-60 cycles, 115-230 volts,
- Serial #4529.026

Spee-Dee model 2000L auger filler
- Stainless steel
- Digitronic controls
- 20 gallon hopper capacity
- Accuracy: +/- 50mg
- Speed: up to 75 cycles/minute

Sprout Waldron DM24 24” Stainless Steel Primary Peanut Butter Mill
- 304 stainless steel contact parts
- Koppers screw feeder with 1 HP, 230/460 volt motor
- Output: 5000 to 6000 lbs/hr
- 75 HP, 3 phase, 60 cycle, 230/460 volt motor
- Serial#85-153
- No control panel

Sprout-Waldron (Andritz) 12" Stainless Steel Peanut Butter Mill
- Output: 400 to 500 lbs/hr
- 304 stainless steel contact parts
- Screw feeder with hopper with 1/3 HP, 230 volt motor (approx. auger speed 250 RPM)
- 7.5 HP, 3 phase, 60 cycle, 230/460 volt motor
- Mounted on portable stand
- Serial#85-1103
- AC inverter speed controller for feeder is broken.

Stainles steel 24 gallon tank.
-16" diameter x 28" measurements tank.

Stainless Steel 94 liter ribbon blender
- 23 1/2" x 16" x 17 1/2" deep inside
- Cover
- Tilt discharge
- 1/4 HP, 3 Phase, 60 Hz, 220-440 volt motor