National Instruments Filamatic model AB-8 Piston Filler
- Purchased new and never used
- FUS260, 260cc piston
- Serial #019814

Hofliger & Karg model GKF50 powder filler.
-Support to hopper.
-Auger.
-Missing hopper, nozzles, knobs.
-1/2 HP, 3 phases, 60 cycles, 220 volts motor.

IMA Zanasi model AZ40 automatic capsule filler
- Capsule feeder station
- Capsule separating station
- Electronic controls
- Size 2 change parts
- Up to 40,000 capsules per hour
- 3 HP, 3 Phase, 60 Hz, 220 volt motor
- Serial no. 88093

J.G. Machine Works Semi-automatic Aerosol Filling Line
-Pneumatic piston filler
-Gasser station
-Pneumatic capper
-Manual capper with pedal
-3/4" HP, 3 phase, 60 cycles, 220-440 volts motor

Kalix 16-Station Hot Jaw Tube Filler
- Trim station
- Stainless Steel Jacketed Hopper
- Hot Jaw sealer
- 16 stations

Kalix model KX plastic tube filler & sealer
- 16 pockets
- Hot jaw sealer
- Stainless steel hopper
- Hand load
- 1/2 HP, 3 Ph, 60 cycles, 220-380 volt motor
- Serial no. 3992

Kalix model KX-60 16-Station Tube filler and sealer
- for Metal Tubes
- Serial#2059
- 1-7/8" diameter piston
- Stainless steel hopper

Kalix model KX67B 16-Station Tube filler and sealer
- for Metal Tubes
- Serial#2676
- 2" diameter piston
- Stainless steel jacketed and agitated hopper

Keith Machinery model TPFS Stainless steel 2 piston filler
- 15 gallon stainless steel hopper
- 12" long x 2-1/2" diameter cylinders
- Foot pedal
- Up to 40 containers/minute
- Variable speed
- Serial #24350

Kulip stainless steel model VD 1000-1 pneumatic piston filler
- air operated
- Hopper
- Adjustable fill range with 1 liter piston size
- Variable speed
- Mounted on wheels

Lead Through Packaging model PL60 High Speed Top Load Case Packer
- Currently packing (24) 190 x 142 x 30 mm bags into a 355 x 244 x 192 mm case
- Case size range: Width: 180-300 m, Length: 200-450 mm, Height: 150-250 mm
- Hot melt glue top and bottom
- Output: Up to 15 cases/minute
- Serial#019016PL60 built 2017
- 3 phase, 60 cycle, 460 volts
- 6 bar compressed air requirement at .250 liters/minute
- Footprint: 2700 x 9800 mm

MATEER SINGLE HEAD AUGER
AUGER POWDER FILLER, SET FOR 35G . 3" WIDTH X 67" LONG STAINLESS STEEL CHAIN CONVEYOR, MOUNTED ON TABLE, MACHINE DIMENSIONS 67" LONG X 31" WIDTH X 80" HEIGHT

NEW CVC model 3036-10H 10-Head Volumetric Piston Filler
- Mounted on a 4.2 M long x 4-1/2" wide sanitary raised bed conveyor other lengths and widths are available)
- Servo bottom up fill and height adjustment
- Siemens PLC and touch screen panel with programmable set up settings
- No bottle, no fill
- Lexan guarding with interlock system
- Quick tool-less change over
- 5 Volumetric piston sizes - 50, 100, 250, 500 and 1000 ml

Speed: Up to 10 cycles/minute
Number of filling heads: 4-12
Filling range: 5-1000 ml

NEW CVC model 3036-12H 12-Head Volumetric Piston Filler
- Mounted on a 4.2 M long x 4-1/2" wide sanitary raised bed conveyor other lengths and widths are available)
- Servo bottom up fill and height adjustment
- Siemens PLC and touch screen panel with programmable set up settings
- No bottle, no fill
- Lexan guarding with interlock system
- Quick tool-less change over
- 5 Volumetric piston sizes - 50, 100, 250, 500 and 1000 ml

Speed: Up to 10 cycles/minute
Number of filling heads: 4-12
Filling range: 5-1000 ml

NEW CVC model 3036-4H 4-Head Volumetric Piston Filler
- Mounted on a 3.0M long x 4-1/2" wide sanitary raised bed conveyor (other lengths and widths are available)
- Servo bottom up fill and height adjustment
- Siemens PLC and touch screen panel with programmable set up settings
- No bottle, no fill
- Lexan guarding with interlock system
- Quick tool-less change over
- 5 Volumetric piston sizes - 50, 100, 250, 500 and 1000 ml

Speed: Up to 10 cycles/minute
Number of filling heads: 4-12
Filling range: 5-1000 ml

NEW CVC model 3036-6H 6-Head Volumetric Piston Filler
- Mounted on a 3.0 M long x 4-1/2" wide sanitary raised bed conveyor other lengths and widths available)
- Servo bottom up fill and height adjustment
- Siemens PLC and touch screen panel with programmable set up settings
- No bottle, no fill
- Lexan guarding with interlock system
- Quick tool-less change over
- 5 Volumetric piston sizes - 50, 100, 250, 500 and 1000 ml

Speed: Up to 10 cycles/minute
Number of filling heads: 4-12
Filling range: 5-1000 ml

NEW CVC model 3036-8H 8-Head Volumetric Piston Filler
- Mounted on a 3.6 M long x 4-1/2" wide sanitary raised bed conveyor other lenghts and widths are available)
- Servo bottom up fill and height adjustment
- Siemens PLC and touch screen panel with programmable set up settings
- No bottle, no fill
- Lexan guarding with interlock system
- Quick tool-less change over
- 5 Volumetric piston sizes - 50, 100, 250, 500 and 1000 ml

Speed: Up to 10 cycles/minute
Number of filling heads: 4-12
Filling range: 5-1000 ml

NEW CVC model 700 accumulating table
- Stainless steel
- 28" diameter turntable
- Speed controller
- Single phase, 60 cycles, 110 volts

New Kentex Model TK800-M Automatic Tube Filler and Sealer for Metal Tubes
Standard features included:
=================================
- 1 set of size change parts
- Automatic cassette infeed and discharge system
- Electric eye for tube centering
- No tube - no fill feature
- Progressive bottom up fill
- Tube counter and ejection mechanism
- 50 liter stainless steel hopper
- 316 stainless steel contact parts
- Portable remote control
- 5 trimming patterns (straight, oval, R, hang hole and wave)
- Coding on either or both sides
- PLC with emergency stop button and automatic stoppage for abnormal tubes
- Tool box with emergency spare parts
- GMP compliant

Optional Features Available:
=================================
- Touch screen control panel - $2,200.00
- Automatic fill level control - $1,590.00
- Tube cleaner - $1,630.00
- 50 liter jacketed hopper with heater and thermos controller - $3,850.00
- Variable speed agitator - $1,930.00
- Chiller - $2,260.00

Specifications:
=================================
- Speed: up to 70 tubes/minute
- Tube diameter: 10 - 40 mm
- Maximum tube length: 280 mm
- Fill volume range: 2 - 320 ml
- Electrical: 3 phase, 60 cycles, 220 volts or 3 phase, 50 cycles, 380 volts

New Kentex Model TK860-HA Automatic Tube Filler and Sealer
- Hot air sealing and trimmer for plastic and laminate tubes
- Suitable for both round and oval tubes Standard features included:
======================
- 1 set of size change parts
- Automatic cassette infeed and discharge system
- Electric eye for tube centering
- No tube - no fill feature
- Progressive bottom up fill
- Tube counter and ejection mechanism
- 50 liter stainless steel hopper
- 316 stainless steel contact parts
- Portable remote control
- 5 trimming patterns (straight, oval, R, hang hole and wave)
- Coding on either or both sides
- PLC with emergency stop button and automatic stoppage for abnormal tubes
- Tool box with emergency spare parts
- GMC compliant

Optional features available:
======================
- Automatic fill level control - $1,590.00
- Tube cleaner - $1,630.00
- 50 liter jacketed hopper with heater and thermos controller - $3,850.00
- Variable speed agitator - $1,930.00
- Chiller - $2,260.00

Specifications:
======================
- Speed: up to 60 tubes/minute
- Tube diameter: 10 – 60 mm
- Maximum tube length: 250 mm
- Fill volume range: 2 – 400 ml
- Electrical: 3 phase, 60 cycles, 220 volts or 3 phase, 50 cycles, 380 volts