Low & Duff 1000 kg Carbon Steel Chocolate Melter
- Model 2T CST, serial#1061 built 1989
- 40 psi jacket
- Agitated
- 3 kw Electric immersion heater, 240 volts with digital thermostat
- Side bottom discharge with valve
- 48" diameter x 58" deep
- 3/4 HP, 3 phase, 230/460 volt motor

Low & Duff 2000 kg Carbon Steel Chocolate Melter
- Model 2T CST, serial#1280 built 1990
- 40 psi jacket
- Agitated
- 3 kw Electric immersion heater, 240 volts
- Side bottom discharge with valve
- 48" diameter x 58" deep
- 2 HP, 3 phase, 60 cycle, 208 volt motor

Low & Duff 2000 kg Carbon Steel Chocolate Melter
- Model 2T CST, serial#1279 built 1990
- 40 psi jacket
- Agitated
- 3 kw Electric immersion heater, 240 volts
- Side bottom discharge with valve
- 48" diameter x 58" deep
- 2 HP, 3 phase, 60 cycle, 208 volt motor

Low & Duff 275 x 175 mm One Shot Depositor
- (32) 1/2" diameter pistons per side of each hopper
- Jacketed and heated hopper
- Two one shot depositing plates: One for 24 pieces and one for 32 pieces (truffles)
- 275 x 175 mm molds
- Vibrator
- 3 phase, 220 volts

Loynds model FW500 Fold Wrapper for Pre-Formed Candies
- Set for piece measuring 15 x 15 x 15 mm
- Manually load product onto lug chain infeed
- Cellophane wrapping material
- Die folds and heat seals
- 3 phase, 60 cycle, 220 volts
- New 2018

Lytzen model C/1300 S/S single door Dry Heat Sterilizer

Designed for dehyrogenation applications in clean room areas made of AISI 304 stainless steel with 180 grit polish with LYTCON 2 (Alen Bradley SLC) PLC control system.
These dry heat sterilizers are suitable for glass and metals such as ampoules, injection bottles & lab glassware, as well as equipment like stainless steel tanks & vessels. Both liquids and powders work well.
Chamber dimensions 700 mm W x 810 mm D x 1300 mm H
Exterior dimensions 1865 mm W x 1110 mm D x 2655 mm H
Electric heating effect Totally 18 kW
Heating time to 250° C Approximately 20 minutes
Cooling time from 250° C - 60° C Approximately 95 minutes
Capacity 1 ml ampoules 40,000
Capacity 10 ml injection bottles 8,600
Capacity 500 ml infusion bottles 400

Lytzen model C/1300 S/S single door Dry Heat Sterilizer

Designed for dehyrogenation applications in clean room areas made of AISI 304 stainless steel with 180 grit polish with LYTCON 2 (Alen Bradley SLC) PLC control system.
These dry heat sterilizers are suitable for glass and metals such as ampoules, injection bottles & lab glassware, as well as equipment like stainless steel tanks & vessels. Both liquids and powders work well.
Chamber dimensions 700 mm W x 810 mm D x 1300 mm H
Exterior dimensions 1865 mm W x 1110 mm D x 2655 mm H
Electric heating effect Totally 18 kW
Heating time to 250° C Approximately 20 minutes
Cooling time from 250° C - 60° C Approximately 95 minutes
Capacity 1 ml ampoules 40,000
Capacity 10 ml injection bottles 8,600
Capacity 500 ml infusion bottles 400

TABLET PRESS, 23 STATION, WITH KEYED HEAD, 220-440 V, 3 PH.

MANESTY BB3B 39-STATION TABLET PRESS KEYED HD, S/S HOPPERS,2-BRONZE FEED FRAMES, MISSING HOPPERS, FEED FRAME, UPPER ROLL SUPPORT, VARIABLE SPEED, MECHANICAL PRESSURE ADJUSTMENTS, MISSING MOTOR.

MANESTY MODEL 25 S/S TABLET DEDUSTER
MANESTY MODEL 25, TABLET DEDUSTER, STAINLESS STEEL, ROTARY CYLINDER 5.5" DIAMETER X 11", 1/12 HP, 24 VDC, 1 PH

MANESTY MODEL 25 TABLET DEDUSTER
MANESTY MODEL 25, TABLET DEDUSTER STAINLESS STEEL CONSTRUCTION AND CONTACT PARTS , 1/8 HP, 110 V, 1 Ph, 20O R.P.M, TABLET DEDUSTER DIMENSIONS 19" LONG X 26" WIDTH X 28" HEIGHT

MANESTY MODEL BB3B 27 STATION TABLET PRESS,
No. Serie: 47A163, 27KEYED HEAD, STAINLESS STEEL HOPPER, FEED FRAME, MECHANICAL PRESSURE ADJUSTMENT, 2 HP, 220-440 V, 2 PH, 1440 R.P.M

MANESTY MODEL BETAPRESS
16 STATION TABLET PRESS, KEYED HEAD, FORCE FEEDER, PRE-COMPRESSION, STAINLESS STEEL HOPER, MECHANICAL PRESSURE ADJUSTMENT, 2 HP, 220 V, 3 PH, 1750 R.P.M., TABLET PRESS DIMENSIONS 28" LONG X 31" WIDTH X 72" HEIGHT

MANESTY NO MODEL STAINLEES STEEL
MANESTY NO MODEL STAINLESS STEEL TABLET DEDUSTER, MISSING INTERNAL ROTATING CYLINDER, 1/8 HP, 110 V, 1 Ph, 203 R.P.M.

MANESTY RBB3 33-STATION TABLET PRESS
MANESTY RBB3 33-STATION ROTARY TABLET PRESS KEYED HEAD, WITH FEED FRAME, STAINLESS STEEL HOPPERS, 3 HP, 220-440 V, 3 PH, 1725 RPM

MERROW CUT ROLL EXTRUDER
MERROW CUT-ROLL CANDY EXTRUDER TO MAKE BALL AND EGG SHAPES COMPLETE WITH PRODUCT CHAMBER, WIRE CUT DEVICE, DUSTING HOPPER, 6" WIDE X 30" LONG ROLLING BELT, 7" WIDE X 5-FT LONG PRODUCT BELT DRIVEN BY A 1-HP, 3 PHASE, 60 CYCLE, 220/440 VOLT MOTOR.

MG2 model G100 automatic capsule filler
- with vacuum pump
- Include different capsule sizes changes part
- Include Dust collector, capsule polisher and capsule inspector
- 2 HP, 3 Phase, 50 Hz, 220-380 volt motor

MILLIPORE NO MODEL CARBON STEEL VACUUM PUMP, INLET = OUTLET = 1/4" DIAMETER, 1/3 HP,115-230 V, 1 PH, 1725-1425 R.P.M.

Mabatec belt conveyor
- 0.18kw motor

Macintyre 500kg Universal Refiner/Conche
- Built 1995
- Machine used only for trial and short runs
- Lining and bars around 70% of useful life
- Extraction fan
- Control panel
- 3 phase, 50 cycle, 380/420 volt motor