National Instruments Filamatic model AB-8 Piston Filler
- Purchased new and never used
- FUS260, 260cc piston
- Serial #019814

Fitzpatrick model C-8540 stainless steel chilsonator
-8" diameter x 1 1/2" long rolls
-With hydraulic pump
-Variable speed
-Mounted on base with wheels
-3 HP, 3 phase, 60 cycles 460 volts motor

Food Process Automation 32" x 10.75 ft Long Cooling Tunnel
- Model 4600-32001
- 32" wide x 129.5" long food grade plastic belt
- 32.75" infeed and 35.75" outfeed. 61" covered
- Temperature controls
- Copeland AC unit
- Variable speed belt
- Blowers with speed controller
- Conveyor height from floor 27"
- 3 phase, 60 cycle, 208 volts, 16.4 amps

Food Tools Model ACC-10USRW Ultrasonic Cake Cutter
- Upgraded X-axis servo drive (Upgraded by Food Tools in October 2021)
- New 12" wide ultrasonic blade (October 2021)
- Machine has not been used since Food Tools did the upgrade and installed the new blade
- Air-operated automatic ultrasonic cutter
- Built 2010
- Serial#4210
- Single phase, 240 volts
- Servo driven indexing system
- Slices round or sheet products in, or out of, the pan, box or container
- Makes shaped cuts for wedges, squares, rectangles, triangular and more
- Perfect for cutting sticky, difficult to cut and delicate products
- Output: 50-100 products per hour
- Size range: up to 12" diameter round products
- Up to 38" diagonal products
- Up to 3.25" tall
- One new cutting board for standard bakery tray is included
- Portion size range: Round 4 to 24 portion cuts/product, Square is determined by product
- Second video link is of this machine after Food Tools upgraded the machine

Food Tools model ACS-110BC rotary blade biscotti cutter
- 15/16" cut width
- Up to 300 loaves/hour
- Maximum biscotti loaf dimensions: 25" long x 1.75" high
- Machine dimensions: 60" long x 31" wide x 39" high
- 1 phase, 50/60 cycles, 120 volts
- Serial #4916

Form, Fill and Seal with Piston Filler
- (2) piston filler filling up to 14 grams per piston
- 8" wide seal bar
- Web width: 13.5”
- Uses one roll of film. Slits and folds film.
- Seals vertical and horizontal seal
- Electric heaters with thermostats

Form, Fill and Seal with Piston Filler
- (2) piston filler filling up to 14 grams per piston
- 8" wide seal bar
- Web width: 13.5”
- Uses one roll of film. Slits and folds film.
- Seals vertical and horizontal seal
- Electric heaters with thermostats
- 220 volts

Forma Scientific model 8417 Ultra Freezer
- 2 stainless steel tray
- 22 ½” long x 25” wide x 51” high internal dimensions
- 3 Phase, 220 volt motor
- Serial no. 83314-934

Freemantle Model SO6 Header Card Applicator
- Built new in 2015
- Serial number 15-914
- Card stock feeder
- Hot melt glue applicator
- Pouch buckets
- Card folder
- Operation:
- Cards are removed from feeder mechanically
- Card is placed in a holder
- Hot glue is applied to card
- Operator lays down pouch in bucket
- Card is folded over pouch
- Sped up to 60 ppm
- 3/60/240v
- Has buckets for pouches:
- 3.25" wide x 5" long
- 2.125" wide x 5" long
- Cost when new $110,000

Freund SFC-Mini Stainless steel Laboratory Fluid bed dryer
-With blower
-Electric heating system
-Missing spray system head and pump
-Missing Bowl and bag shaking
-Control Panel
-1/2 HP, 3 Phase, 60 cycles, 220 volts motor

Frisse Model DUC 6LT 6 Ton Conche
- Built new in 1985
- Serial number 4478
- Still installed
- Estimated rigging cost $35,000

Fristam FKL25A Positive Displacement Pump
- Serial#FKL25A1315428
- 1 HP, 3 phase, 60 cycle, 230/460 volt motor

Fristam FKL25A SS PD Pump
- Model FKL25A, serial#FKL25A1407887
- 2 HP, 3 phase, 60 cycle, 230/460 volt motor

Fristam Stainless steel centrifugal pump
-1 1/4" inlet and outlet
-Stainless steel impellers
-2/3 HP, 3 Phase, 60 Hz, 460 volt motor

Fristam model FKL15A-STD stainless steel positive displacement pump
-1 3/8" inlet and outlet
-Stainless steel impellers
-Mounted on base
-1 HP, 3 Phase, 60 Hz, 230-460 volt motor
- Serial no. FKL15AT/06363

Fristam model FKL25A stainless steel positive displacement pump
-1 1/2" inlet and outlet
-Stainless steel impellers
-Mounted on base
-1 ½ HP, 3 Phase, 60 Hz, 220 volt motor
-Serial no. FKL25A11027-3

Fryma model MK 60 vertical stainless steel colloid mill
- Applications include dispersion wet milling for food, cosmetics, chemicals, etc.
- Adjustable grinding gap
- 1 HP motor
- Serial #78-5229

Fryma model MZ80R vertical stainless steel colloid mill
- Toothed mill design for wet milling of fluids & viscous emulsions & suspensions
- Estimated capacity: 100-1000 liters per hour
- Particle size range: 500-100 microns
- Adjustable grinding gap
- 5 HP motor

Fuji QJ700 Marumerizer Spheronizer
- Stainless steel
- Jacketed bowl
- 2 mm grooved spheronizing plate
- Plate lift mechanism
- Side discharge with pneumatically operated plug valve
- Serial No. 20050

Fumex Dust Collector
-Hepa filter
-12" long x 12" wide x 7" tall filter dimensions
-1/3HP, 1 Phase, 60 cycles, 127 volts motor