(2) Dispensa-Matic U45 Label Dispensers
- S/N 39484,
- S/N 39038,
- 115V, 60 Hz

Advent model 310 Semi-automatic pressure sensitive wraparound labeler
- Up to 35 containers/minute
- Containers are hand fed, and ejected automatically
- No change parts for different sized containers
- Container diameter: 1/2" – 12"
- Label Width: 3/4" – 8"
- Label length: 1” – 20”
- 1/8 HP, 1 Phase, 60 cycles, 110 volt motor
- Serial #12036

Advent model 310 semi-automatic pressure sensitive wraparound labeler
- Up to 35 containers/minute
- Containers are hand fed, and ejected automatically
- No change parts for different sized containers
- Hot stamp coder
- Container diameter: 1/2" – 12"
- Label Width: 3/4" – 8"
- Label length: 1” – 20”
- 1 phase, 60 cycles, 110 volts
- Serial #11936

Advent model 310 semi-automatic pressure sensitive wraparound labeler
- Up to 35 containers/minute
- Containers are hand fed, and ejected automatically
- No change parts for different sized containers
- Hot stamp coder
- Container diameter: 1/2" – 12"
- Label Width: 3/4" – 8"
- Label length: 1” – 20”
- 1 phase, 60 cycles, 110 volts
- Serial #12228

Autolabe model 280 Semiautomatic wraparound Labeler
- Pressure sensitive
- Without coder
- 1/16 HP, 1 Phase, 60 cycles, 110 volt motor
- Serial no .984115

Autolabe model 560 Semiautomatic Labeler
- Pressure sensitive
- Flat containers
- Without coder
- 1/8 HP, 1 Phase, 60 cycles, 110 volt motor
- Serial no. 980202

El Patriarca semiautomatic labeler
- Round containers
- hot melt glue
- Mounted on casters
- 1/4 HP, 1 Phase, 60 cycles, 110 volt motor

Freemantle Model SO6 Header Card Applicator
- Built new in 2015
- Serial number 15-914
- Card stock feeder
- Hot melt glue applicator
- Pouch buckets
- Card folder
- Operation:
- Cards are removed from feeder mechanically
- Card is placed in a holder
- Hot glue is applied to card
- Operator lays down pouch in bucket
- Card is folded over pouch
- Sped up to 60 ppm
- 3/60/240v
- Has buckets for pouches:
- 3.25" wide x 5" long
- 2.125" wide x 5" long
- Cost when new $110,000

Label-Aire 3138-NV Printer Label Applicator
- Mounted over 10" wide x 72" long conveyor
- Zebra model 110PAX4 printer
- Stepper rewind

LabelPack Wraparound Labeler for Tubes
- Built New in June 2021
- Automatic tube feed
- Set for 19 mm diameter tubes (re-tooling for other diameters up approx. 2" is available)
- Applies label and spins tube to wrap the label around the tube
- Discharge conveyor with cleated belt

Labelette model M20 labeler
- For round containers
- Hot melt glue
- Missing container for the glue, motor and base
- Serial no. 117574

Murcia Model MC-140P Stainless Steel Wraparound Labeler.
- 6” width x 60” long conveyor.
- Manual adjustment for different bottle size
- Hot stamping coder.
- 1/2 HP, 3 Phases, 60 Cycles, 220 volt motor

New CVC model 220 Pressure Sensitive Top and Bottom Labeler
New CVC model 220 top & bottom pressure sensitive labeler mounted on a 6" wide (10" also available) x 73" long belt conveyor with stainless steel frame on lockable casters. These labelers come with CVC's patented selfset (tm) product set-up system, which generates initial settings for motor speed, bottle application timing and labeling position and displays product output and labels remaining.

- Mounted on a 55-1/2" long x 6" wide conveyor
- Patented SELFSET one touch auto adjusting set up
- Stainless steel frame
- Hand-held terminal with LCD display
- Lockable casters
- Single phase, 60 cycle, 110 volts
- Up to 200 labels per minute
- Product height: 1" – 7-1/4"
- Product width: 1" – 10"
- Product length: 1" - 16"
- Label height: 5/8" – 6"
- Label length: 5/8" – 10"

New CVC model 300 wraparound pressure sensitive labeler
- mounted on a 79" long x 4" wide stainless steel platform chain conveyor (also available with 94", 118", 138" & 158" long and 4-1/2" & 6" wide conveyors)
- patented SELFSET one touch auto adjusting set up
- stainless steel frame
- Servo motor with PLC controls
- lockable casters
- single phase, 60 cycle, 220 volts
Speed: up to 170/minute
Bottle height: 1" - 12"
Bottle diameter" 1" - 7"
Label height: 3/8" - 9"
Label length: 5/8" - 12"

New CVC model 302 wraparound pressure sensitive labeler mounted on a 121" long x 4" wide chain conveyor. It can be equipped with a bar code verification, hot stamp code verification and automatic rejection system. The labeling head is servo motor powered for increased speed and accuracy and is equipped with a touch screen control, which is programmed in English, Spanish and Chinese. These labelers come with CVC's patented selfset (tm) product set-up system, which generates initial settings for motor speed, bottle application timing and labeling position and displays product output and labels remaining.

- Mounted on a 121" long x 4" wide stainless steel platform chain conveyor (6" wide also available)
- Patented SELFSET one touch auto adjusting set up
- Stainless steel frame
- Touchscreen HMI and servo motor with PLC controls
- Adjustable tilt for tapered bottles
- Lockable casters
- Single phase, 60 cycle, 220 volts
- Up to 250 bottles per minute
- Bottle height: 1" - 12"
- Bottle diameter: 1" - 7"
- Label height: 3/8" - 7"
- Label length: 1/2" - 12"

New CVC model 310 wraparound pressure sensitive labeler for large containers
- mounted on a 79" long x 6" wide stainless steel platform chain conveyor (also available with 94", 118", 138" & 158" long and 10" wide conveyors)
- patented SELFSET one touch auto adjusting set up
- stainless steel frame
- Servo motor with PLC controls
- lockable casters
- single phase, 60 cycle, 220 volts

Speed: up to 160/minute
Bottle height: 1" - 12"
Bottle diameter" 1" - 10"
Label height: 3/8" - 9"
Label length: 5/8" - 17-3/4"

New CVC model 330 Vertical Vial and Ampoule Wraparound Pressure Sensitive Labeler
New CVC model 330 vertical pressure sensitive vial labeler mounted on a 4" wide belt conveyor, with a 27-3/16" stainless steel accumulating table. A rectangular infeed tray with vial pusher is also available. These labelers come with CVC's patented selfset(tm) product set-up system, which generates initial settings for motor speed, bottle application and labeling position and displays product output and labels remaining. This labeler is ideal for cylindrical items such as ampoules, vials, lip balm containers, crayons, batteries, etc.

- Mounted on a 82" long x 4" wide stainless steel platform chain conveyor
- M700 28" diameter loading table
- Patented SELFSET one touch auto adjusting set up
- Stainless steel frame
- Servo motor with PLC controls
- lockable casters
- single phase, 60 cycle, 220 volts
- up to 190 bottles per minute
- bottle height: 1" – 10"
- bottle diameter: 1/2" – 4"
- label height: 3/8" – 4-3/4"
- label length: 5/8" – 10"

New CVC model 350 Horizontal Wraparound Pressure Sensitive Labeler
New CVC model 350 horizontal vial and ampoule pressure sensitive labeler for cylindrical items mounted on a 67" long x 5-5/8" wide chain conveyor (118", 138" and 158" chain conveyors are also available. These labelers come with CVC's patented selfset(tm) product set-up system, which generates initial settings for motor speed, bottle application and labeling position and displays product output and labels remaining. This labeler is ideal for cylindrical items such as ampoules, vials, lip balm containers, crayons, batteries, etc.
- Mounted on a 66" long x 5-5/8" wide stainless steel roller chain conveyor on a 25 degree angle
- Patented selfset(tm) one touch auto adjusting set up
- Stainless steel frame
- Servo motor with PLC controls
- Lockable casters
- Single phase, 60 cycle, 220 volts
- Up to 200 bottles per minute
- Bottle height: 1" - 7"
- Bottle diameter: 1/2" - 2"
- Label height: 3/8" - 3-3/4"
- Label length: 5/8" - 6"

New CVC model 400 front & back pressure sensitive labeler mounted on a 79" long x 4" wide chain conveyor (118", 138" and 158" chain conveyors are also available). These labelers come with CVC's patented selfset™ product set-up system, which generates initial settings for motor speed, bottle application timing and labeling position and displays product output and labels remaining.
- Mounted on a 94-1/2" long x 3-1/4" wide stainless steel platform chain conveyor (6" wide also available)
- Patented SELFSET one touch auto adjusting set up
- Stainless steel frame
- Servo motor with PLC controls
- Lockable casters
- Single phase, 60 cycle, 220 volts
- Up to 220 bottles per minute
- Bottle height: 2" – 16"
- Bottle width: ½" – 6-1/4"
- Bottle length: ½" – 12"
- Label height: 5/8" – 9"
- Label length: 5/8" – 12"

New CVC model 430 Front & Back and Wraparound Pressure Sensitive Labeler
New CVC model 430 front & back & wraparound pressure sensitive labeler mounted on a 79" long x 4" wide chain conveyor (118", 138" and 158" chain conveyors are also available). These labelers come with CVC's patented selfset (tm) product set-up system, which generates initial settings for motor speed, bottle application timing and labeling position and displays product output and labels remaining. Labeler can be changed over from front & back to a wraparound application in only 10 minutes.
- 3 machines in 1 - front, front & back and wraparound
- Patented SELFSET one touch auto adjusting set up
- Stainless steel frame
- Servo motor with PLC controls
- Lockable casters
- Single phase, 60 cycle, 220 volts
- Up to 175 bottles per minute
- Bottle height: 2" - 16"
- Bottle width: 1/2" - 6-1/4"
- Bottle length: 1/2" - 12"
- Label height: 5/8" - 9"
- Label length: 5/8" - 12"

CLICK LINK BELOW FOR VIDEO:
http://www.youtube.com/watch?v=EY0c4nAKcyM