66" long x 4" dia. screw conveyor
- Stainless steel
- 24" dia x 18" deep hopper
- 3 phase, 60 cycles, 250/440 volts

AFS Flew Screw Conveyor
- Approx. 3" diameter x 11.5 ft long Auger with plastic tube
- Stainless steel hopper approx. 38" x 38" x 36" deep
- 230/460 volts

Aluminum conveyor
- 3 1/4" wide x 69" long flat top chain conveyor
- 36" leg height
- 1/3 HP, 3 Phase, 60 cycles, 220 volt motor

Aluminum model 2100-0603-02/0 Belt Conveyor
-6" width x 36" long canvas belt conveyor
-Missing legs
-1/6 HP, 1 Phase, 60 cycles, 127 volts motor

CIMA model NTY-150 stainlees steel elevator.
-3 HP, 3 Phases, 60 Cycles, 440 Volts motor.

CIMA model NTY-150 stainlees steel elevator.
-3 HP, 3 Phases, 60 Cycles, 440 Volts motor.

CIMA model NTY-150 stainless steel elevator.
-For mixer
-Mounted in base with wheels.
-7.5 HP , 3 Phases, 60 Cycles, 220 Volts motor.

CIMA model NTY-150 stainless steel elevator.
-For mixer
-Mounted in base with wheels.
-7.5 HP , 3 Phases, 60 Cycles, 220 Volts motor.

CIMA model ZLT700B stainless steel elevator.
-For mixer
-Mounted in base with wheels.
-7.5 HP , 3 Phases, 60 Cycles, 220 Volts motor.

DTG 48" Wide Polishing Belt Coater
- Stainless steel belt
- Blower
- Manual controls
- Serial#7461

Deamco model BES-12F-T-X Z-Configuration 77" tall Bucket Elevator
- 11.75" x 4.5" x 2.5" deep plastic buckets
- 42" long infeed leg and 74" long discharge leg
- 72" discharge height including discharge hopper
- Does not include vibratory infeed hopper
- 3 phase, 60 cycle, 480 volt

Kalish model 9272 stainless steel cleated conveyor
- 3" x 12" cleats
- 91" discharge height
- 1/2 HP, 1 Phase, 60 cycles, 110 volt motor
- Serial #007

Kramer Stainless Steel Elevator
-4" wide x 52" long Belt Conveyor
-Variable Speed
-Mounted on base with casters
-1/4 HP, 1 phase, 60 cycle, 110 volts motor

Kramer Stainless Steel Tablet Feeder
- 4" wide x 52" long Belt Conveyor
- missing belt
- 1/4 HP, 1 phase, 60 cycle, 110 volt motor
- mounted on base with casters

Kramer model 1600 Stainless Steel Tablet Feeder
- 4" wide x 52" long Belt Conveyor
- missing belt
- 1/4 HP, 1 phase, 60 cycle, 110 volt motor
- mounted on base with casters

Lakso 4-ft Long Stainless Steel Conveyor
- 3.25" wide x 4-ft long plastic flat top chain conveyor
- DC variable speed motor with DC controller set for 110 volts

Microfluidics Model M110EH Microfluidizer High Shear Liquid Processor
- Electric-hydraulic homogenizer
- Heat exchanger
- Ceramic plunger
- Handles batches from 120ml - 100 liters
- Flow rate: up to 450ml/minute
- Maximum pressure: 30,000 PSI
- Feed temperature range: 35* F - 165* F
- On casters
- 3 phase, 60 cycles, 220 volts
- Serial #2004112
Link - https://www.microfluidics-mpt.com/microfluidizers/pilot-scale-m-110eh

New CVC (Cremer) model 1220 High Speed Electronic Channel Counter
- 12 channels, each with an infrared sensor
- LD hand held terminal (Touch screen PC terminal optional)
- Infeed and outfeed track sensors
- Auto dust compensation with dual vacuum ports
- Count verification and rejection
- Stainless steel construction
- 50 job memory capacity
- Quick and simple change over

Tablet/capsule/soft gel width/diameter: 1/8" - 3/4"
Tablet/capsule/soft gel length: 1/8" - 1-3/16"
Bottle height: 1-1/2" - 7-3/4"
Bottle diameter: 3/4" - 4"
Capacity: Up to 55 bottles per minute on a 100 count fill

New CVC (Cremer) model 1620 High Speed Electronic Channel Counter
- 16 channels, each with an infrared sensor
- Can be set up to run one bottle using all 16 channels, or two bottles using 8 channels
- Touch screen PC terminal
- Infeed and outfeed track sensors
- Auto dust compensation with dual vacuum ports
- Count verification and rejection
- Stainless steel construction
- 50 job memory capacity
- Quick and simple change over

Tablet/capsule/soft gel width/diameter: 1/8" - 3/4"
Tablet/capsule soft gel length: 1/8" - 1-3/16"
Bottle height: 1-1/" - 7-3/4"
Bottle diameter: 3/4" - 4"
Capacity:
- Single bottle - up to 70 bottles per minute on a 100 count fill
- Double bottle - up to 100 bottles per minute on a 90 count fill

Ozaf model E-40-SX Stainless Steel Bottle Feeder
-7” wide cleated conveyor. Cleats are 2” x 7”long
- 92" discharge
-2/3 HP, 3 Phase, 60 cycle, 220 volts motor