(2) Dispensa-Matic U45 Label Dispensers
- S/N 39484,
- S/N 39038,
- 115V, 60 Hz

Accraply model 5005WA Top and Wraparound labeler
- Two model 500 label applicators
- 4.5" wide x 10.5’ long plastic flat top chain conveyor
- Stepper motor
- 120 volts
- On Casters

Advent model 310 Semi-automatic pressure sensitive wraparound labeler
- Up to 35 containers/minute
- Containers are hand fed, and ejected automatically
- No change parts for different sized containers
- Container diameter: 1/2" – 12"
- Label Width: 3/4" – 8"
- Label length: 1” – 20”
- 1/8 HP, 1 Phase, 60 cycles, 110 volt motor
- Serial #12036

Advent model 310 semi-automatic pressure sensitive wraparound labeler
- Up to 35 containers/minute
- Containers are hand fed, and ejected automatically
- No change parts for different sized containers
- Hot stamp coder
- Container diameter: 1/2" – 12"
- Label Width: 3/4" – 8"
- Label length: 1” – 20”
- 1 phase, 60 cycles, 110 volts
- Serial #11936

Autolabe model 280 Semiautomatic wraparound Labeler
- Pressure sensitive
- Without coder
- 1/16 HP, 1 Phase, 60 cycles, 110 volt motor
- Serial no .984115

Autolabe model 560 Semiautomatic Labeler
- Pressure sensitive
- Flat containers
- Without coder
- 1/8 HP, 1 Phase, 60 cycles, 110 volt motor
- Serial no. 980202

CTM Labeling Systems Model 3600a-AB-S84ex Print & Apply Labeler
- Mounted on a 144" long x 3-3/4" wide conveyor
- Sato model 584EX thermal & ribbon printer
- Allen Bradley PLC
- Dell Latitude 5540 laptop
- Air reject system
- Minimum label dimensions: 1" wide x 1/4" long
- Maximum label dimensions: 6.5" wide x 10" long
- Speed: up to 12"/second
- 3 phase, 60 cycles, 230/460 volts
- Mounted on casters
- Dimensions: 12' long x 5' wide
- Serial #3600AB-0139-1809

El Patriarca semiautomatic labeler
- Round containers
- hot melt glue
- Mounted on casters
- 1/4 HP, 1 Phase, 60 cycles, 110 volt motor

Freemantle Model SO6 Header Card Applicator
- Built new in 2015
- Serial number 15-914
- Card stock feeder
- Hot melt glue applicator
- Pouch buckets
- Card folder
- Operation:
- Cards are removed from feeder mechanically
- Card is placed in a holder
- Hot glue is applied to card
- Operator lays down pouch in bucket
- Card is folded over pouch
- Sped up to 60 ppm
- 3/60/240v
- Has buckets for pouches:
- 3.25" wide x 5" long
- 2.125" wide x 5" long
- Cost when new $110,000

Kalish stainless steel model 6801 wraparound pressure sensitive labeler
- 4” wide x 149” long conveyor
- Hot stamping coder
- 1/3 HP, 1 Phase, 60 cycles 110 volt motor

Label Mill Model LM3605CSTRH542-12 Print & Apply Labeler
- Mounted on a Dorner model 2200 72" long x 3-3/4" wide belt conveyor
- Thermal printer
- Zebra ZE500 print engine
- 12" stroke tamp
- Compliant Smart Pad
- On T stand with casters
- Speed: up to 6"/second, and 60 labels/minute
- Minimum label dimensions: 1" wide x 3/4" long
- Maximum label dimensions: 7.2" wide x 14" long
- Maximum print area: 4" wide x 14" long
- Single phase, 60 cycles, 115 volts
- Invertek OptiDrive E3 IP66/NEMA 4x VFD
- Dimensions: 76" long x 54" wide
- Serial #330401D1PA

Label Mill Model LM3605CSTRH542-12 Print & Apply Labeler
- Mounted on a Dorner model 2200 72" long x 3-3/4" wide belt conveyor
- Thermal printer
- Zebra ZE500 print engine
- 12" stroke tamp
- Compliant Smart Pad
- On T stand with casters
- Speed: up to 6"/second, and 60 labels/minute
- Minimum label dimensions: 1" wide x 3/4" long
- Maximum label dimensions: 7.2" wide x 14" long
- Maximum print area: 4" wide x 14" long
- Single phase, 60 cycles, 115 volts
- Invertek OptiDrive E3 IP66/NEMA 4x VFD
- Dimensions: 76" long x 54" wide
- Serial #330601D1PA

Label Mill Model LM3605CSTRH542-12 Print & Apply Labeler
- Mounted on a Dorner model 2200 72" long x 3-3/4" wide belt conveyor
- Thermal printer
- Zebra ZE500 print engine
- 12" stroke tamp
- Compliant Smart Pad
- On T stand with casters
- Speed: up to 6"/second, and 60 labels/minute
- Minimum label dimensions: 1" wide x 3/4" long
- Maximum label dimensions: 7.2" wide x 14" long
- Maximum print area: 4" wide x 14" long
- Single phase, 60 cycles, 115 volts
- Invertek OptiDrive E3 IP66/NEMA 4x VFD
- Dimensions: 76" long x 54" wide
- Serial #330501D1PA

Label-Aire 3138-NV Printer Label Applicator
- Mounted over 10" wide x 72" long conveyor
- Zebra model 110PAX4 printer
- Stepper rewind

LabelPack Wraparound Labeler for Tubes
- Built New in June 2021
- Automatic tube feed
- Set for 19 mm diameter tubes (re-tooling for other diameters up approx. 2" is available)
- Applies label and spins tube to wrap the label around the tube
- Discharge conveyor with cleated belt

Labelette model M20 labeler
- For round containers
- Hot melt glue
- Missing container for the glue, motor and base
- Serial no. 117574

Maquinaria Exclusiva model 20M semi-automatic glue Labeler
- For round containers
- Hot melt glue
- 1/4 HP, 1 Phase, 60 cycles, 110 volt motor
- Serial no. 030

Murcia Model MC-140P Stainless Steel Wraparound Labeler.
- 6” width x 60” long conveyor.
- Manual adjustment for different bottle size
- Hot stamping coder.
- 1/2 HP, 3 Phases, 60 Cycles, 220 volt motor

NERI MODEL AGS500R, SERIAL NUMBER MSUA00903,
NERI MODEL AGS500R, SERIAL NUMBER MSUA00201, LABEL BUFFER

New CVC model 220 Pressure Sensitive Top and Bottom Labeler
New CVC model 220 top & bottom pressure sensitive labeler mounted on a 6" wide (10" also available) x 73" long belt conveyor with stainless steel frame on lockable casters. These labelers come with CVC's patented selfset (tm) product set-up system, which generates initial settings for motor speed, bottle application timing and labeling position and displays product output and labels remaining.

- Mounted on a 55-1/2" long x 6" wide conveyor
- Patented SELFSET one touch auto adjusting set up
- Stainless steel frame
- Hand-held terminal with LCD display
- Lockable casters
- Single phase, 60 cycle, 110 volts
- Up to 200 labels per minute
- Product height: 1" – 7-1/4"
- Product width: 1" – 10"
- Product length: 1" - 16"
- Label height: 5/8" – 6"
- Label length: 5/8" – 10"