Glatt model CM400 stainless steel column mixer
- With Hydraulic unit
- Serial no. 6844

Globe Pharma model MBIV Maxiblend 16 quart V blender
- Stainless steel
- 1.5 HP, 3 phase, 60 cycles, 115 volts
- Serial # 031733078G
- Manufactured in 2017

Goodway model CM35 Continuous Mixer -
- Stainless steel jacketed mixing head
- Flowrator and controls
- 20 HP, 3 phase, 60 cycle, 230/460 volt motor
- 600 to 3600 lbs/hr cast marshmallow
- See attached pdf for other product outputs

HAAGEN & RINAU RU-V1-200 HIGH SHEAR MIXER
HAAGEN & RINAU MODEL RU-V1-200 UNIMIX STAINLESS STEEL, TRIPLE ACTION, 200 LITER (50-GALLON) CAPACITY PROCESSING KETTLE WITH VACUUM COVER WITH A SWEPT SURFACE AGITATOR WITH SCRAPERS AND A ROTATING STAINLESS STEEL PADDLE WITH A BOTTOM DRIVEN HIGH SHEER MIXER WITH A 3-HP MOTOR WITH A 3-HP, 3 PHASE, 50 CYCLE, 380 VOLT MAIN DRIVE MOTOR.
THIS UNIMIX PLANETARY MIXER CAN BE USED WITH HOMOGENEOUS PRODUCTS SUCH AS MARZIPAN, NOUGAT, MAYONNAISE, SALAD DRESSINGS, SAUCES, KETCHUP AND BABY FOOD. THIS MACHINE IS TYPICALLY USED FOR COSMETICS.

Haas Mondomix B.V B25 Continuous Aerator
- 750 to 3,000 kg/hr output
- Jacketed
- Max working pressure 150 psi
- 3 phase, 50 cycle, 380 volts with control panel

High shear homomixer
- 35" long shaft
- 4" diameter rotor
- 3 phase, 60 cycle, 230/460 volt, 3400 RPM. HP tag not readable. Approx. 5 HP

Hobart Model H-600 60 Quart Vertical Mixer
- Stainless steel bowl & paddle
- 1 HP, 1 phase, 60 cycles, 208 volts
- Serial #1413528

JH Day 125 gallon Pony mixer
- Stainless steel
- 39" dia. x 28" deep stainless steel can
- 5 HP, 3 phase, 60 cycles, 208-220/400 volt motor

Lightnin' model XJA100 pneumatic propeller agitator, without shaft,
- Serial #89/801265

Lightnin' model XJA33 pneumatic propeller agitator, without shaft
- Serial #2632100

Littleford model FM-130 plow mixer
- 130 liters - 4.6 Cubic feet
- Stainless steel
- 1 plow
- Discharge opening: 6-1/2" x 4-1/2"
- Discharge height: 43-1/2"
- Main Motor: 15 HP, 3 phase, 60 cycles, 230-460 Volts, 1165 R.P.M.
- Chopper motor: 10 HP, 3 phase, 60 cycles, 230-460 Volts, 3490 R.P.M.

Littleford model FM-50 50 liter plow mixer
- Stainless steel
- 1.8 Cu Ft
- 1 chopper
- Main motor: 3 HP, 3 phase, 60 cycles, 220 volts
- Chopper motor: 3 HP, 3 phase, 60 cycles, 220 volts
- Serial # 40289-2752

Magna-Weight model S700-2 scale
- Capacity 180 kg
- Mounted on wheels

Merril model 72-39ADH trucks lifts
- 90" elevation
- 1200 lb capacity
- Serial no. 72235

Model PG-7000 stainless steel capsule deduster.
-5" diameter x 25" long brush dimensions.
-Variable speed.
-Mounted in wheels.
-1 HP, 1 Phase, 60 Cycles, 110 Volts motor.

Morse 185-C hoist
Morse 185-C Hoist
- Manual lift
- 500 lb capacity
- Serial no. 602

N&N Nadratowski Model MIX-180 Paddle Blender
- Stainless steel
- Capacity 180 liters
- 29.5” long x 22.75” wide x 19.5” high bowl
- 9” wide x 5” high bottom side discharge
- 30/60 RPM
- 3 phase, 60 cycles, 220 volts
- Manufactured in 2019
- Serial No. 1822
- Link to spec sheet - https://nadratowski.com/mix-mieszalka?machine=mix-mixv

NEC stainless steel tablet counter.
-Vibratory hbopper
-18" diameter x glass turntables
-Double funnels front and rear
-1/8 HP, 1 Phase, 60 Cycles, 110 Volts motor

New NEC 1 cu. ft. Stainless Steel Double Ribbon Blenders
- Capacity: 7.5 gallons
- Motor: 1 HP, 3 phase, 60 cycle, 220 volts
- RPM: 60
- Lids & Grates: 1
- Discharge: Manual butterfly valve
- Safety switch
- Bowl Dimensions: 17.7" (L) x 11" (W) x 13" (H)
- Overall Dimensions: 32.8" (L) x 16.3" (W) x 34.1" (H)

New NEC 10 cu. ft. 304 Stainless Steel V Blenders with inensifier bar
- Capacity: 10 cu. ft.
- Motor: 4 HP, 3 phase, 60 cycles 220/440 volts10 cu. ft.
- RPM: 12
- Discharge Diameter: 4"
- Working Dimensions: 75" (L) x 24" (W) x 69" (H)